PIXMA Printer MG3150 Wireless Connection Setup

Canon PIXMA Printer MG3150 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (in some cases referred to as routers or hubs) characteristics an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This enables permitted gadgets this kind of as your Canon PIXMA MG3150 to attach on your network devoid of needing to enter a password, and it will allow a rapidly and quick technique of connecting your gadgets.

This technique is undoubtedly the easiest usually means of connecting your Printer MG3150 Wireless, so if your accessibility stage has a WPS button, please choose the ‘WPS Connection Method’ tab below for guidelines on connecting producing use of this course of action. If the router would not help WPS we have presented choice pointers to have your Canon PIXMA MG3150 linked so please choose the ‘Standard Connection Method’ tab beneath.

Printer MG3150 Wireless

Printer MG3150 Wireless

Printer MG3150 Wireless WPS Connection Method

Ahead of we begin, some disorders need to be accomplished to perform with the WPS press button course of action:

  1. The accessibility problem has to have an real bodily WPS drive button supplied. Remember to examine along with your device’s customer guidebook for specifics. In situation the WPS drive button is not obtainable, you really should use the suggestions to the Regular Connection Method tab.
  2. Your network need to be employing the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and sustain the (Wi-Fi) button about the foremost with the printer until the orange alarm lamp flashes at the time just after which you can launch it. Guarantee that the Wi-Fi button starts to flash blue just after which head to your accessibility area and push the (WPS) button within two minutes. For serious factors about pressing the WPS button, keep in mind to test with the accessibility problem guide.

The blue Wi-Fi lamp all-around the printer will maintain on ?ash when trying to find for, or connect in direction of the accessibility area. During the setup, the environmentally pleasant electrical energy lamp can even begin to flash. When the printer has created a romance to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is effectively linked to your wi-fi network, you might print out the local community configurations of one’s printer if you want:

  • Be positive that your printer is turned on.
  • Load a sheet of A4 or Letter-sized uncomplicated paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until eventually the orange alarm lamp flashes fifteen moments and just after that launch it. The network details internet site will be printed.
Other Drivers & Software  Canon MG5520 Scanner Driver Download

When referring on the printout, test out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or probably the title of the wireless network) signifies the appropriate identify of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the software program to make the most out of your Canon PIXMA MG3150.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is nevertheless failing just after following this guidebook, please contact us for even more support.

Printer MG3150 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to test out the accurate suggestions for the working technique:

Printer MG3150 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the pc when much more and click on (My Laptop) or (This Computer technique), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not give the CD (’s) that came with your merchandise, be positive to receive the manuals and software program bundle.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection technique, then click (Next).
  4. Select (Access Point Connection (suggested)) as the wireless LAN connection technique then click (Next).
  5. Ensure that your printer is turned on, make positive the green energy lamp is on and then click (Next).
  6. The software program will now briefly search your network for any printers presently linked. If this is the very first time you are setting up your printer, it will not be observed. So please assure that (Setting printer could not be positioned on the checklist) is picked, then click (Next).
  7. The Setup Guide Installation will now begin.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until eventually the orange alarm lamp flashes two occasions and release just after the 2nd flash, then click (Next).
  11. Make positive that the blue Wi-Fi lamp flashes swiftly and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, choose your area and click (Next).
  15. When the following display seems, choose your language and then click (Next).
  16. If the subsequent display seems, choose out the system you want to set up, then click on (Following). If you are uncertain which pc software program you want to set up at this time, actually do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software program bundle will now place in. If the following keep track of is exhibited all through the set up, just click on (Redetect) to search for your printer when once more. Based on your local community configuration, it might effectively consider a minute or so for that software program bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may be exhibited to indicate the solution inside your printer as effectively as recognize (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the very first time you are place up your printer, if the pursuing show is exhibited, click on (Execute) and stick to the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu software program, so click (Cancel).
  24. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to finish the set up.
Other Drivers & Software  PIXMA Printer MG5640 Wireless Connection Setup

This Printer MG3150 Wireless the Windows setup

Should the wi-fi set up continues to be failing just after following this guidebook, make positive you phone us for even much more aid.

Printer MG3150 Wireless Cableless Setup technique (For Mac customers only)

Before you begin, please download the installation software.

  1. Once downloaded, go to the place of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG3150 Wireless
  2. When the following display is displayed, click Open.Printer MG3150 Wireless
  3. When the original display seems, click on (Next).
  4. You might be asked to style in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection technique and then click (Next).
  7. Select (Access Point Connection (suggested)) as the wireless LAN connection technique then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for virtually any printers now linked. If this can be the pretty very first time you may be place up your printer, it’ll not be identified. So keep in mind to make positive that (Environment printer could not be located on the checklist) is picked, then click (Next).
  10. If the following display seems, choose (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until eventually the orange alarm lamp flashes two occasions and release just after the 2nd flash, and then click (Next).
  14. Make positive that the blue Wi-Fi lamp flashes swiftly and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the up coming message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, choose your area, and then click on (Next).
  19. When the following display seems, choose your language and click (Next).
  20. When the following display seems, choose the software program you want to set up, and then click on (Next). If you are not positive which software program you want to set up at this stage, really don’t fear, as you can often uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to produce an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software program will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, choose the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the pretty very first time you are setting up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu software program, so click (Cancel).
  32. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to finish the set up.
Other Drivers & Software  Canon PIXMA MG8100 Driver Download

This Printer MG3150 Wireless the Mac setup

If the wireless setup is nevertheless failing just after following this guidebook, please contact us for even more support.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG3150 Wireless Connection Setup

No votes so far! Be the first to rate this post.