PIXMA Printer MG3050 Wireless Connection Setup

Canon PIXMA Printer MG3050 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (in some cases referred to as routers or hubs) characteristics an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This permits permitted gadgets this kind of as your Canon PIXMA MG3050 to attach on your network devoid of needing to enter a password, and it will allow a quickly and straightforward process of connecting your gadgets.

This technique is undoubtedly the easiest signifies of connecting your Printer MG3050 Wireless, so if your entry stage has a WPS button, please pick the ‘WPS Connection Method’ tab beneath for guidelines on connecting creating use of this course of action. If the router would not help WPS we have offered selection suggestions to have your Canon PIXMA MG3050 linked so please pick the ‘Standard Connection Method’ tab under.

Printer MG3050 Wireless

Printer MG3050 Wireless

Printer MG3050 Wireless WPS Connection Method

Ahead of we start off, some ailments should be accomplished to get the job done with the WPS press button course of action:

  1. The entry situation has to have an real bodily WPS drive button supplied. Remember to examine along with your device’s customer manual for specifics. In situation the WPS drive button is not obtainable, you must make use of the suggestions to the Regular Connection Method tab.
  2. Your network should be working with the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and preserve the (Wi-Fi) button about the major with the printer until the orange alarm lamp flashes at the time right after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue right after which head to your entry area and push the (WPS) button within two minutes. For authentic factors about pressing the WPS button, recall to examine with the accessibility situation guide.

The blue Wi-Fi lamp all around the printer will retain on ?ash whilst in search of for, or connect in the direction of the accessibility area. During the setup, the environmentally pleasant electrical energy lamp can even start off to flash. When the printer has manufactured a romance to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is the right way linked to your wi-fi network, you may well print out the local community configurations of one’s printer if you want:

  • Be confident that your printer is turned on.
  • Load a sheet of A4 or Letter-sized basic paper.
  • Press and hold the Cancel(MASTER) Cancel Button button till the orange alarm lamp flashes fifteen moments and right after that launch it. The network information web page will be printed.
Other Drivers & Software  ImageCLASS MF6160dw Driver Download

When referring on the printout, examine out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the appropriate identify of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the software program to make the most out of your Canon PIXMA MG3050.
  • If you do not have the set up CD that came with your products, please download the manuals and software.
  • If the wireless setup is nonetheless failing right after following this manual, please contact us for more support.

Printer MG3050 Wireless Standard Connection Method

Remember to use the hyperlinks down under to examine out the proper suggestions for the working technique:

Printer MG3050 Wireless Standard Connection Method – For Windows end users only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the personal computer the moment a lot more and click on (My Laptop) or (This Computer process), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not offer the CD (’s) that came with your merchandise, be confident to receive the manuals and software program bundle.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection technique, then click (Next).
  4. Select (Access Point Connection (advised)) as the wireless LAN connection technique then click (Next).
  5. Ensure that your printer is turned on, make confident the green energy lamp is on and then click (Next).
  6. The software program will now briefly search your network for any printers by now linked. If this is the to start with time you are setting up your printer, it will not be discovered. So please be certain that (Setting printer could not be positioned on the checklist) is picked, then click (Next).
  7. The Setup Guide Installation will now start off.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two occasions and release right after the 2nd flash, then click (Next).
  11. Make confident that the blue Wi-Fi lamp flashes immediately and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry stage is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, choose out the plan you want to set up, then click on (Following). If you are uncertain which personal computer software program you want to set up at this time, genuinely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software program bundle will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer the moment once more. Based on your local community configuration, it may well very well consider a minute or so for that software program bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could possibly be exhibited to indicate the products inside of your printer as very well as recognize (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the to start with time you are spot up your printer, if the pursuing show is exhibited, click on (Execute) and observe the on-display instructions to achieve the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu software program, so click (Cancel).
  24. If you want to consider element in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to full the set up.
Other Drivers & Software  Canon PIXMA iP8740 Driver Download

This Printer MG3050 Wireless the Windows setup

Should the wi-fi set up continues to be failing right after following this manual, make confident you phone us for even a lot more assist.

Printer MG3050 Wireless Cableless Setup technique (For Mac end users only)

Before you start off, please download the installation software.

  1. Once downloaded, go to the spot of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG3050 Wireless
  2. When the following display is displayed, click Open.Printer MG3050 Wireless
  3. When the first display seems, click on (Next).
  4. You may well be asked to variety in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection technique and then click (Next).
  7. Select (Access Point Connection (advised)) as the wireless LAN connection technique then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for nearly any printers now linked. If this can be the incredibly to start with time you could possibly be spot up your printer, it’ll not be found. So recall to make confident that (Environment printer could not be located on the checklist) is picked, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two occasions and release right after the 2nd flash, and then click (Next).
  14. Make confident that the blue Wi-Fi lamp flashes immediately and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the entry stage is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the software program you want to set up, and then click on (Next). If you are not confident which software program you want to set up at this stage, really don’t be concerned, as you can constantly uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to develop an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software program will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the incredibly to start with time you are natural environment up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu software program, so click (Cancel).
  32. If you want to consider element in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to full the set up.
Other Drivers & Software  PIXMA Printer MG2950 Wireless Connection Setup

This Printer MG3050 Wireless the Mac setup

If the wireless setup is nonetheless failing right after following this manual, please contact us for more support.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG3050 Wireless Connection Setup

No votes so far! Be the first to rate this post.