PIXMA Printer PRO-100S Wireless Connection Setup

Posted on

Canon PIXMA Printer PRO-100S Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (occasionally referred to as routers or hubs) capabilities an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This permits permitted units this kind of as your Canon PIXMA PRO-100S to attach on your network devoid of needing to enter a password, and it will allow a quick and quick method of connecting your units.

This strategy is undoubtedly the easiest implies of connecting your Printer PRO-100S Wireless, so if your accessibility stage has a WPS button, please choose the ‘WPS Connection Method’ tab beneath for directions on connecting building use of this procedure. If the router would not help WPS we have offered choice recommendations to have your Canon PIXMA PRO-100S linked so please choose the ‘Standard Connection Method’ tab beneath.

Printer PRO-100S Wireless

Printer PRO-100S Wireless

Printer PRO-100S Wireless WPS Connection Method

Ahead of we commence, some disorders should be accomplished to function with the WPS press button procedure:

  1. The accessibility problem has to have an real bodily WPS drive button presented. Remember to examine along with your device’s buyer guidebook for specifics. In situation the WPS drive button is not obtainable, you should really make use of the suggestions to the Regular Connection Method tab.
  2. Your network should be applying the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the foremost with the printer until the orange alarm lamp flashes at the time just after which you can launch it. Guarantee that the Wi-Fi button starts to flash blue just after which head to your accessibility spot and push the (WPS) button within two minutes. For authentic factors about pressing the WPS button, don’t forget to check out with the accessibility problem guide.

The blue Wi-Fi lamp all over the printer will preserve on ?ash even though searching for for, or connect in direction of the accessibility spot. During the setup, the environmentally pleasant electrical energy lamp can even commence to flash. When the printer has created a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is accurately linked to your wi-fi network, you could print out the local community configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized straightforward paper.
  • Press and hold the Cancel(MASTER) Cancel Button button right up until the orange alarm lamp flashes fifteen moments and just after that launch it. The network information web site will be printed.

When referring on the printout, check out out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the appropriate title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the software program to make the most out of your Canon PIXMA PRO-100S.
  • If you do not have the set up CD that came with your product or service, please download the manuals and software.
  • If the wireless setup is nevertheless failing just after following this guidebook, please contact us for additional help.

Printer PRO-100S Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to check out out the proper suggestions for the working strategy:

Printer PRO-100S Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop as soon as far more and click on (My Laptop) or (This Computer method), select the CD-ROM and double-click (MSETUP4.EXE). If you do not present the CD (’s) that came with your merchandise, be absolutely sure to acquire the manuals and software program bundle.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection strategy, then click (Next).
  4. Select (Access Point Connection (encouraged)) as the wireless LAN connection strategy then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green energy lamp is on and then click (Next).
  6. The software program will now briefly search your network for any printers by now linked. If this is the 1st time you are setting up your printer, it will not be observed. So please make sure that (Setting printer could not be found on the record) is chosen, then click (Next).
  7. The Setup Guide Installation will now commence.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer right up until the orange alarm lamp flashes two occasions and release just after the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes speedily and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, choose your area and click (Next).
  15. When the following display seems, choose your language and then click (Next).
  16. If the subsequent display seems, select out the plan you want to set up, then click on (Following). If you are uncertain which laptop software program you want to set up at this time, seriously do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software program bundle will now place in. If the following keep track of is exhibited all through the set up, just click on (Redetect) to search for your printer as soon as once again. Based on your local community configuration, it could very well get a minute or so for that software program bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could be exhibited to indicate the product or service inside of your printer as very well as recognize (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the 1st time you are place up your printer, if the pursuing show is exhibited, click on (Execute) and comply with the on-display instructions to achieve the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu software program, so click (Cancel).
  24. If you want to get portion in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to finish the set up.

This Printer PRO-100S Wireless the Windows setup

Should the wi-fi set up continues to be failing just after following this guidebook, make absolutely sure you phone us for even far more support.

Printer PRO-100S Wireless Cableless Setup strategy (For Mac customers only)

Before you commence, please download the installation software.

  1. Once downloaded, go to the place of the file and double-click it. When the following display is displayed, double-click (Setup).Printer PRO-100S Wireless
  2. When the following display is displayed, click Open.Printer PRO-100S Wireless
  3. When the original display seems, click on (Next).
  4. You could be asked to variety in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection strategy and then click (Next).
  7. Select (Access Point Connection (encouraged)) as the wireless LAN connection strategy then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for virtually any printers now linked. If this can be the extremely 1st time you could be place up your printer, it’ll not be identified. So don’t forget to make absolutely sure that (Environment printer could not be located on the record) is chosen, then click (Next).
  10. If the following display seems, choose (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer right up until the orange alarm lamp flashes two occasions and release just after the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes speedily and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the up coming message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, choose your area, and then click on (Next).
  19. When the following display seems, choose your language and click (Next).
  20. When the following display seems, choose the software program you want to set up, and then click on (Next). If you are not absolutely sure which software program you want to set up at this stage, really do not be concerned, as you can often uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to generate an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software program will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, choose the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the extremely 1st time you are setting up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu software program, so click (Cancel).
  32. If you want to get portion in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to complete a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to finish the set up.

This Printer PRO-100S Wireless the Mac setup

If the wireless setup is nevertheless failing just after following this guidebook, please contact us for additional help.  or get Information from Official Website Canon