PIXMA Printer PRO-100 Wireless Connection Setup

By Posted on

Canon PIXMA Printer PRO-100 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (in some cases referred to as routers or hubs) options an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This will allow permitted products this kind of as your Canon PIXMA PRO-100 to attach on your network devoid of needing to enter a password, and it will allow a rapidly and simple process of connecting your products.

This process is undoubtedly the easiest signifies of connecting your Printer PRO-100 Wireless, so if your accessibility level has a WPS button, please decide on the ‘WPS Connection Method’ tab beneath for guidelines on connecting producing use of this approach. If the router would not help WPS we have supplied selection tips to have your Canon PIXMA PRO-100 linked so please decide on the ‘Standard Connection Method’ tab under.

Printer PRO-100 Wireless

Printer PRO-100 Wireless

Printer PRO-100 Wireless WPS Connection Method

Ahead of we commence, some situations need to be attained to function with the WPS press button approach:

  1. The accessibility problem has to have an real bodily WPS drive button made available. Remember to examine along with your device’s customer guidebook for specifics. In situation the WPS drive button is not obtainable, you should really use the suggestions to the Regular Connection Method tab.
  2. Your network need to be working with the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and retain the (Wi-Fi) button about the foremost with the printer until the orange alarm lamp flashes at the time right after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue right after which head to your accessibility spot and push the (WPS) button within two minutes. For genuine factors about pressing the WPS button, don’t forget to check out with the accessibility problem guide.

The blue Wi-Fi lamp all over the printer will preserve on ?ash even though in search of for, or connect in the direction of the accessibility spot. During the setup, the environmentally pleasant electrical electrical power lamp can even commence to flash. When the printer has produced a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is the right way linked to your wi-fi network, you may perhaps print out the neighborhood configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized easy paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until eventually the orange alarm lamp flashes fifteen moments and right after that launch it. The network details web-site will be printed.

When referring on the printout, check out out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or probably the title of the wireless network) signifies the suitable title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the software program to make the most out of your Canon PIXMA PRO-100.
  • If you do not have the set up CD that came with your product or service, please download the manuals and software.
  • If the wireless setup is nonetheless failing right after following this guidebook, please contact us for even more help.

Printer PRO-100 Wireless Standard Connection Method

Remember to use the hyperlinks down under to check out out the proper suggestions for the working process:

Printer PRO-100 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the personal computer when a lot more and click on (My Laptop) or (This Computer process), select the CD-ROM and double-click (MSETUP4.EXE). If you do not deliver the CD (’s) that came with your merchandise, be absolutely sure to receive the manuals and software program bundle.
  2. When the preliminary display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection process, then click (Next).
  4. Select (Access Point Connection (advised)) as the wireless LAN connection process then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green electrical power lamp is on and then click (Next).
  6. The software program will now briefly search your network for any printers by now linked. If this is the 1st time you are setting up your printer, it will not be identified. So please assure that (Setting printer could not be found on the record) is picked, then click (Next).
  7. The Setup Guide Installation will now commence.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until eventually the orange alarm lamp flashes two occasions and release right after the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes rapidly and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility level is finished click (Next).
  14. When the following display seems, decide on your area and click (Next).
  15. When the following display seems, decide on your language and then click (Next).
  16. If the subsequent display seems, select out the system you want to set up, then click on (Following). If you are uncertain which personal computer software program you want to set up at this time, truly do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software program bundle will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer when once again. Based on your neighborhood configuration, it may perhaps properly get a minute or so for that software program bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may well be exhibited to indicate the product or service inside your printer as properly as determine (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the 1st time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and stick to the on-display instructions to complete the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu software program, so click (Cancel).
  24. If you want to get portion in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to finish the set up.

This Printer PRO-100 Wireless the Windows setup

Should the wi-fi set up continues to be failing right after following this guidebook, make absolutely sure you phone us for even a lot more aid.

Printer PRO-100 Wireless Cableless Setup process (For Mac customers only)

Before you commence, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer PRO-100 Wireless
  2. When the following display is displayed, click Open.Printer PRO-100 Wireless
  3. When the preliminary display seems, click on (Next).
  4. You may perhaps be asked to style in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection process and then click (Next).
  7. Select (Access Point Connection (advised)) as the wireless LAN connection process then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for pretty much any printers now linked. If this can be the really 1st time you may well be area up your printer, it’ll not be found. So don’t forget to make absolutely sure that (Environment printer could not be located on the record) is picked, then click (Next).
  10. If the following display seems, decide on (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until eventually the orange alarm lamp flashes two occasions and release right after the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes rapidly and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the accessibility level is finished click (Next).
  18. When the following display seems, decide on your area, and then click on (Next).
  19. When the following display seems, decide on your language and click (Next).
  20. When the following display seems, decide on the software program you want to set up, and then click on (Next). If you are not absolutely sure which software program you want to set up at this stage, do not fret, as you can usually uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to develop an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software program will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, decide on the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the really 1st time you are surroundings up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu software program, so click (Cancel).
  32. If you want to get portion in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to finish the set up.

This Printer PRO-100 Wireless the Mac setup

If the wireless setup is nonetheless failing right after following this guidebook, please contact us for even more help.  or get Information from Official Website Canon

Related posts: