PIXMA Printer MX925 Wireless Connection Setup

Posted on

Canon PIXMA Printer MX925 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (at times referred to as routers or hubs) attributes an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This makes it possible for permitted products this kind of as your Canon PIXMA MX925 to attach on your network devoid of needing to enter a password, and it will allow a quick and quick method of connecting your products.

This strategy is undoubtedly the easiest indicates of connecting your Printer MX925 Wireless, so if your entry stage has a WPS button, please choose the ‘WPS Connection Method’ tab beneath for guidelines on connecting producing use of this procedure. If the router would not help WPS we have offered alternative recommendations to have your Canon PIXMA MX925 linked so please choose the ‘Standard Connection Method’ tab beneath.

Printer MX925 Wireless

Printer MX925 Wireless

Printer MX925 Wireless WPS Connection Method

Ahead of we start out, some circumstances will have to be accomplished to operate with the WPS press button procedure:

  1. The entry difficulty has to have an real bodily WPS drive button presented. Remember to examine along with your device’s client guidebook for specifics. In situation the WPS drive button is not obtainable, you must make use of the suggestions to the Regular Connection Method tab.
  2. Your network will have to be making use of the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the foremost with the printer until the orange alarm lamp flashes at the time immediately after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue immediately after which head to your entry area and push the (WPS) button within two minutes. For actual facets about pressing the WPS button, keep in mind to verify with the accessibility difficulty guide.

The blue Wi-Fi lamp close to the printer will preserve on ?ash though searching for for, or connect in direction of the accessibility area. During the setup, the environmentally pleasant electrical energy lamp can even start out to flash. When the printer has manufactured a romance to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is accurately linked to your wi-fi network, you may well print out the neighborhood configurations of one’s printer if you want:

  • Be confident that your printer is turned on.
  • Load a sheet of A4 or Letter-sized easy paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until eventually the orange alarm lamp flashes fifteen moments and immediately after that launch it. The network information internet site will be printed.

When referring on the printout, verify out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or maybe the title of the wireless network) signifies the correct identify of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the software package to make the most out of your Canon PIXMA MX925.
  • If you do not have the set up CD that came with your products, please download the manuals and software.
  • If the wireless setup is nonetheless failing immediately after following this guidebook, please contact us for additional support.

Printer MX925 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to verify out the right suggestions for the working strategy:

Printer MX925 Wireless Standard Connection Method – For Windows consumers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the pc when a lot more and click on (My Laptop) or (This Computer method), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not give the CD (’s) that came with your merchandise, be confident to acquire the manuals and software package package deal.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection strategy, then click (Next).
  4. Select (Access Point Connection (advisable)) as the wireless LAN connection strategy then click (Next).
  5. Ensure that your printer is turned on, make confident the green energy lamp is on and then click (Next).
  6. The software package will now briefly search your network for any printers previously linked. If this is the initial time you are setting up your printer, it will not be identified. So please be certain that (Setting printer could not be found on the record) is chosen, then click (Next).
  7. The Setup Guide Installation will now start out.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until eventually the orange alarm lamp flashes two occasions and release immediately after the 2nd flash, then click (Next).
  11. Make confident that the blue Wi-Fi lamp flashes rapidly and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry stage is finished click (Next).
  14. When the following display seems, choose your area and click (Next).
  15. When the following display seems, choose your language and then click (Next).
  16. If the subsequent display seems, choose out the plan you want to set up, then click on (Following). If you are uncertain which pc software package you want to set up at this time, definitely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software package package deal will now place in. If the following check is exhibited during the set up, just click on (Redetect) to search for your printer when once again. Based on your neighborhood configuration, it may well effectively get a minute or so for that software package package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could possibly be exhibited to indicate the products inside of your printer as effectively as determine (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the initial time you are spot up your printer, if the pursuing show is exhibited, click on (Execute) and stick to the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on making use of the Quick Menu software package, so click (Cancel).
  24. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to finish the set up.

This Printer MX925 Wireless the Windows setup

Should the wi-fi set up continues to be failing immediately after following this guidebook, make confident you phone us for even a lot more assist.

Printer MX925 Wireless Cableless Setup strategy (For Mac consumers only)

Before you start out, please download the installation software.

  1. Once downloaded, go to the spot of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MX925 Wireless
  2. When the following display is displayed, click Open.Printer MX925 Wireless
  3. When the first display seems, click on (Next).
  4. You may well be asked to sort in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection strategy and then click (Next).
  7. Select (Access Point Connection (advisable)) as the wireless LAN connection strategy then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for just about any printers now linked. If this can be the quite initial time you could possibly be spot up your printer, it’ll not be found. So keep in mind to make confident that (Environment printer could not be located on the record) is chosen, then click (Next).
  10. If the following display seems, choose (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until eventually the orange alarm lamp flashes two occasions and release immediately after the 2nd flash, and then click (Next).
  14. Make confident that the blue Wi-Fi lamp flashes rapidly and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the entry stage is finished click (Next).
  18. When the following display seems, choose your area, and then click on (Next).
  19. When the following display seems, choose your language and click (Next).
  20. When the following display seems, choose the software package you want to set up, and then click on (Next). If you are not confident which software package you want to set up at this stage, really don’t stress, as you can often uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to make an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software package will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, choose the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the quite initial time you are natural environment up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on making use of the Quick Menu software package, so click (Cancel).
  32. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to finish the set up.

This Printer MX925 Wireless the Mac setup

If the wireless setup is nonetheless failing immediately after following this guidebook, please contact us for additional support.  or get Information from Official Website Canon