PIXMA Printer MX524 Wireless Connection Setup

Posted on

Canon PIXMA Printer MX524 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (occasionally referred to as routers or hubs) capabilities an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This enables permitted units this kind of as your Canon PIXMA MX524 to attach on your network devoid of needing to enter a password, and it will allow a quickly and uncomplicated technique of connecting your units.

This technique is undoubtedly the easiest signifies of connecting your Printer MX524 Wireless, so if your accessibility level has a WPS button, please pick the ‘WPS Connection Method’ tab underneath for guidelines on connecting generating use of this procedure. If the router would not help WPS we have offered possibility suggestions to have your Canon PIXMA MX524 linked so please pick the ‘Standard Connection Method’ tab under.

Printer MX524 Wireless

Printer MX524 Wireless

Printer MX524 Wireless WPS Connection Method

Ahead of we start out, some situations have to be accomplished to do the job with the WPS press button procedure:

  1. The accessibility difficulty has to have an real bodily WPS drive button made available. Remember to examine along with your device’s client guidebook for specifics. In situation the WPS drive button is not obtainable, you should really make use of the suggestions to the Regular Connection Method tab.
  2. Your network have to be applying the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and preserve the (Wi-Fi) button about the major with the printer until the orange alarm lamp flashes at the time right after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue right after which head to your accessibility area and push the (WPS) button within two minutes. For authentic elements about pressing the WPS button, don’t forget to check out with the accessibility difficulty guide.

The blue Wi-Fi lamp all over the printer will maintain on ?ash whilst looking for for, or connect in direction of the accessibility area. During the setup, the environmentally pleasant electrical electrical power lamp can even start out to flash. When the printer has produced a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is properly linked to your wi-fi network, you may perhaps print out the neighborhood configurations of one’s printer if you want:

  • Be positive that your printer is turned on.
  • Load a sheet of A4 or Letter-sized easy paper.
  • Press and hold the Cancel(MASTER) Cancel Button button till the orange alarm lamp flashes fifteen moments and right after that launch it. The network information web site will be printed.

When referring on the printout, check out out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the right title of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the computer software to make the most out of your Canon PIXMA MX524.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is nevertheless failing right after following this guidebook, please contact us for even further support.

Printer MX524 Wireless Standard Connection Method

Remember to use the hyperlinks down under to check out out the appropriate suggestions for the working technique:

Printer MX524 Wireless Standard Connection Method – For Windows end users only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop when much more and click on (My Laptop) or (This Computer technique), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not supply the CD (’s) that came with your merchandise, be positive to acquire the manuals and computer software bundle.
  2. When the preliminary display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection technique, then click (Next).
  4. Select (Access Point Connection (advisable)) as the wireless LAN connection technique then click (Next).
  5. Ensure that your printer is turned on, make positive the green electrical power lamp is on and then click (Next).
  6. The computer software will now briefly search your network for any printers previously linked. If this is the to start with time you are setting up your printer, it will not be uncovered. So please assure that (Setting printer could not be positioned on the listing) is picked, then click (Next).
  7. The Setup Guide Installation will now start out.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two instances and release right after the 2nd flash, then click (Next).
  11. Make positive that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility level is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, choose out the system you want to set up, then click on (Following). If you are uncertain which laptop computer software you want to set up at this time, seriously do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The computer software bundle will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer when once more. Based on your neighborhood configuration, it may perhaps properly get a minute or so for that computer software bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may be exhibited to indicate the solution inside of your printer as properly as determine (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the to start with time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and comply with the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu computer software, so click (Cancel).
  24. If you want to get aspect in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to comprehensive the set up.

This Printer MX524 Wireless the Windows setup

Should the wi-fi set up continues to be failing right after following this guidebook, make positive you get in touch with us for even much more assistance.

Printer MX524 Wireless Cableless Setup technique (For Mac end users only)

Before you start out, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MX524 Wireless
  2. When the following display is displayed, click Open.Printer MX524 Wireless
  3. When the preliminary display seems, click on (Next).
  4. You may perhaps be asked to form in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection technique and then click (Next).
  7. Select (Access Point Connection (advisable)) as the wireless LAN connection technique then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for nearly any printers now linked. If this can be the incredibly to start with time you may be area up your printer, it’ll not be found. So don’t forget to make positive that (Environment printer could not be located on the listing) is picked, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two instances and release right after the 2nd flash, and then click (Next).
  14. Make positive that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the accessibility level is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the computer software you want to set up, and then click on (Next). If you are not positive which computer software you want to set up at this stage, really do not fear, as you can normally uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to generate an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The computer software will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the incredibly to start with time you are natural environment up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu computer software, so click (Cancel).
  32. If you want to get aspect in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to complete a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to comprehensive the set up.

This Printer MX524 Wireless the Mac setup

If the wireless setup is nevertheless failing right after following this guidebook, please contact us for even further support.  or get Information from Official Website Canon