PIXMA Printer MX494 Wireless Connection Setup

Canon PIXMA Printer MX494 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (at times referred to as routers or hubs) options an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This enables permitted gadgets this kind of as your Canon PIXMA MX494 to attach on your network devoid of needing to enter a password, and it will allow a rapidly and simple program of connecting your gadgets.

This process is undoubtedly the easiest usually means of connecting your Printer MX494 Wireless, so if your accessibility level has a WPS button, please choose the ‘WPS Connection Method’ tab beneath for directions on connecting creating use of this system. If the router would not help WPS we have presented alternative tips to have your Canon PIXMA MX494 linked so please choose the ‘Standard Connection Method’ tab beneath.

Printer MX494 Wireless

Printer MX494 Wireless

Printer MX494 Wireless WPS Connection Method

Ahead of we begin, some problems need to be accomplished to do the job with the WPS press button system:

  1. The accessibility difficulty has to have an real bodily WPS drive button supplied. Remember to examine along with your device’s customer manual for specifics. In situation the WPS drive button is not obtainable, you should really make use of the suggestions to the Regular Connection Method tab.
  2. Your network need to be utilizing the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and sustain the (Wi-Fi) button about the primary with the printer until the orange alarm lamp flashes at the time following which you can launch it. Guarantee that the Wi-Fi button starts to flash blue following which head to your accessibility spot and push the (WPS) button within two minutes. For authentic factors about pressing the WPS button, don’t forget to examine with the accessibility difficulty guide.

The blue Wi-Fi lamp all over the printer will continue to keep on ?ash although looking for for, or connect in the direction of the accessibility spot. During the setup, the environmentally pleasant electrical energy lamp can even begin to flash. When the printer has created a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is accurately linked to your wi-fi network, you may well print out the neighborhood configurations of one’s printer if you want:

  • Be positive that your printer is turned on.
  • Load a sheet of A4 or Letter-sized basic paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until finally the orange alarm lamp flashes fifteen moments and following that launch it. The network details website will be printed.
Other Drivers & Software  PIXMA MG6320 Wireless Support

When referring on the printout, examine out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the good title of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the software program to make the most out of your Canon PIXMA MX494.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is even now failing following following this manual, please contact us for more help.

Printer MX494 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to examine out the right suggestions for the working process:

Printer MX494 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the pc when a lot more and click on (My Laptop) or (This Computer program), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not deliver the CD (’s) that came with your merchandise, be positive to acquire the manuals and software program package deal.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection process, then click (Next).
  4. Select (Access Point Connection (encouraged)) as the wireless LAN connection process then click (Next).
  5. Ensure that your printer is turned on, make positive the green energy lamp is on and then click (Next).
  6. The software program will now briefly search your network for any printers currently linked. If this is the to start with time you are setting up your printer, it will not be uncovered. So please make sure that (Setting printer could not be situated on the checklist) is chosen, then click (Next).
  7. The Setup Guide Installation will now begin.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until finally the orange alarm lamp flashes two occasions and release following the 2nd flash, then click (Next).
  11. Make positive that the blue Wi-Fi lamp flashes swiftly and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility level is finished click (Next).
  14. When the following display seems, choose your area and click (Next).
  15. When the following display seems, choose your language and then click (Next).
  16. If the subsequent display seems, choose out the plan you want to set up, then click on (Following). If you are uncertain which pc software program you want to set up at this time, genuinely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software program package deal will now place in. If the following keep track of is exhibited all through the set up, just click on (Redetect) to search for your printer when once again. Based on your neighborhood configuration, it may well nicely consider a minute or so for that software program package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may possibly be exhibited to indicate the solution inside of your printer as nicely as recognize (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the to start with time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and adhere to the on-display instructions to achieve the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on utilizing the Quick Menu software program, so click (Cancel).
  24. If you want to consider portion in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to total the set up.
Other Drivers & Software  PIXMA Printer MX434 Wireless Connection Setup

This Printer MX494 Wireless the Windows setup

Should the wi-fi set up continues to be failing following following this manual, make positive you phone us for even a lot more assistance.

Printer MX494 Wireless Cableless Setup process (For Mac customers only)

Before you begin, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MX494 Wireless
  2. When the following display is displayed, click Open.Printer MX494 Wireless
  3. When the original display seems, click on (Next).
  4. You may well be asked to form in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection process and then click (Next).
  7. Select (Access Point Connection (encouraged)) as the wireless LAN connection process then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for virtually any printers now linked. If this can be the extremely to start with time you may possibly be area up your printer, it’ll not be identified. So don’t forget to make positive that (Environment printer could not be located on the checklist) is chosen, then click (Next).
  10. If the following display seems, choose (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until finally the orange alarm lamp flashes two occasions and release following the 2nd flash, and then click (Next).
  14. Make positive that the blue Wi-Fi lamp flashes swiftly and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the up coming message is displayed, click on (Allow).
  17. Once the connection to the accessibility level is finished click (Next).
  18. When the following display seems, choose your area, and then click on (Next).
  19. When the following display seems, choose your language and click (Next).
  20. When the following display seems, choose the software program you want to set up, and then click on (Next). If you are not positive which software program you want to set up at this stage, do not fear, as you can often uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to make an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software program will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, choose the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the extremely to start with time you are natural environment up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on utilizing the Quick Menu software program, so click (Cancel).
  32. If you want to consider portion in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to complete a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to total the set up.
Other Drivers & Software  PIXMA MX492 Wireless Support

This Printer MX494 Wireless the Mac setup

If the wireless setup is even now failing following following this manual, please contact us for more help.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MX494 Wireless Connection Setup

No votes so far! Be the first to rate this post.