PIXMA Printer MX474 Wireless Connection Setup

Posted on

Canon PIXMA Printer MX474 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (in some cases referred to as routers or hubs) characteristics an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This lets permitted gadgets this kind of as your Canon PIXMA MX474 to attach on your network devoid of needing to enter a password, and it will allow a speedy and uncomplicated program of connecting your gadgets.

This strategy is undoubtedly the easiest indicates of connecting your Printer MX474 Wireless, so if your entry stage has a WPS button, please pick the ‘WPS Connection Method’ tab beneath for guidelines on connecting producing use of this course of action. If the router would not help WPS we have offered possibility suggestions to have your Canon PIXMA MX474 linked so please pick the ‘Standard Connection Method’ tab under.

Printer MX474 Wireless

Printer MX474 Wireless

Printer MX474 Wireless WPS Connection Method

Ahead of we start off, some ailments have to be accomplished to get the job done with the WPS press button course of action:

  1. The entry situation has to have an real bodily WPS drive button presented. Remember to examine along with your device’s shopper guidebook for specifics. In situation the WPS drive button is not obtainable, you must make use of the suggestions to the Regular Connection Method tab.
  2. Your network have to be applying the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and preserve the (Wi-Fi) button about the primary with the printer until the orange alarm lamp flashes at the time following which you can launch it. Guarantee that the Wi-Fi button starts to flash blue following which head to your entry spot and push the (WPS) button within two minutes. For actual elements about pressing the WPS button, recall to test with the accessibility situation guide.

The blue Wi-Fi lamp all around the printer will maintain on ?ash even though in search of for, or connect in the direction of the accessibility spot. During the setup, the environmentally pleasant electrical electrical power lamp can even start off to flash. When the printer has produced a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is accurately linked to your wi-fi network, you could print out the neighborhood configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized basic paper.
  • Press and hold the Cancel(MASTER) Cancel Button button right up until the orange alarm lamp flashes fifteen moments and following that launch it. The network details website will be printed.

When referring on the printout, test out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the appropriate identify of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the software program to make the most out of your Canon PIXMA MX474.
  • If you do not have the set up CD that came with your product or service, please download the manuals and software.
  • If the wireless setup is nevertheless failing following following this guidebook, please contact us for additional support.

Printer MX474 Wireless Standard Connection Method

Remember to use the hyperlinks down under to test out the right suggestions for the working strategy:

Printer MX474 Wireless Standard Connection Method – For Windows end users only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop or computer the moment far more and click on (My Laptop) or (This Computer program), select the CD-ROM and double-click (MSETUP4.EXE). If you do not deliver the CD (’s) that came with your merchandise, be absolutely sure to receive the manuals and software program bundle.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection strategy, then click (Next).
  4. Select (Access Point Connection (advised)) as the wireless LAN connection strategy then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green electrical power lamp is on and then click (Next).
  6. The software program will now briefly search your network for any printers currently linked. If this is the initial time you are setting up your printer, it will not be identified. So please be certain that (Setting printer could not be situated on the record) is picked, then click (Next).
  7. The Setup Guide Installation will now start off.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer right up until the orange alarm lamp flashes two occasions and release following the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry stage is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, select out the plan you want to set up, then click on (Following). If you are uncertain which laptop or computer software program you want to set up at this time, definitely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software program bundle will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer the moment yet again. Based on your neighborhood configuration, it could effectively get a minute or so for that software program bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could possibly be exhibited to indicate the product or service inside your printer as effectively as recognize (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the initial time you are place up your printer, if the pursuing show is exhibited, click on (Execute) and comply with the on-display instructions to achieve the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu software program, so click (Cancel).
  24. If you want to get element in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to comprehensive the set up.

This Printer MX474 Wireless the Windows setup

Should the wi-fi set up continues to be failing following following this guidebook, make absolutely sure you contact us for even far more assist.

Printer MX474 Wireless Cableless Setup strategy (For Mac end users only)

Before you start off, please download the installation software.

  1. Once downloaded, go to the place of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MX474 Wireless
  2. When the following display is displayed, click Open.Printer MX474 Wireless
  3. When the first display seems, click on (Next).
  4. You could be asked to variety in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection strategy and then click (Next).
  7. Select (Access Point Connection (advised)) as the wireless LAN connection strategy then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for nearly any printers now linked. If this can be the quite initial time you could possibly be place up your printer, it’ll not be found. So recall to make absolutely sure that (Environment printer could not be located on the record) is picked, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer right up until the orange alarm lamp flashes two occasions and release following the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the upcoming message is displayed, click on (Allow).
  17. Once the connection to the entry stage is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the software program you want to set up, and then click on (Next). If you are not absolutely sure which software program you want to set up at this stage, really don’t stress, as you can generally uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to make an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software program will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the quite initial time you are setting up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu software program, so click (Cancel).
  32. If you want to get element in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to comprehensive the set up.

This Printer MX474 Wireless the Mac setup

If the wireless setup is nevertheless failing following following this guidebook, please contact us for additional support.  or get Information from Official Website Canon