PIXMA Printer MP499 Wireless Connection Setup

Posted on

Canon PIXMA Printer MP499 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (in some cases referred to as routers or hubs) capabilities an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This makes it possible for permitted gadgets this kind of as your Canon PIXMA MP499 to attach on your network devoid of needing to enter a password, and it will allow a quick and effortless method of connecting your gadgets.

This strategy is undoubtedly the easiest implies of connecting your Printer MP499 Wireless, so if your accessibility level has a WPS button, please decide on the ‘WPS Connection Method’ tab below for guidelines on connecting building use of this method. If the router would not assistance WPS we have offered selection tips to have your Canon PIXMA MP499 linked so please decide on the ‘Standard Connection Method’ tab under.

Printer MP499 Wireless

Printer MP499 Wireless

Printer MP499 Wireless WPS Connection Method

Ahead of we start out, some ailments should be accomplished to operate with the WPS press button method:

  1. The accessibility situation has to have an real bodily WPS drive button supplied. Remember to examine along with your device’s client guidebook for specifics. In situation the WPS drive button is not obtainable, you really should employ the suggestions to the Regular Connection Method tab.
  2. Your network should be making use of the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the major with the printer until the orange alarm lamp flashes at the time immediately after which you can launch it. Guarantee that the Wi-Fi button starts to flash blue immediately after which head to your accessibility spot and push the (WPS) button within two minutes. For serious factors about pressing the WPS button, try to remember to verify with the accessibility situation guide.

The blue Wi-Fi lamp all around the printer will continue to keep on ?ash whilst looking for for, or connect in the direction of the accessibility spot. During the setup, the environmentally pleasant electrical electrical power lamp can even start out to flash. When the printer has produced a partnership to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is properly linked to your wi-fi network, you may perhaps print out the neighborhood configurations of one’s printer if you want:

  • Be positive that your printer is turned on.
  • Load a sheet of A4 or Letter-sized easy paper.
  • Press and hold the Cancel(MASTER) Cancel Button button till the orange alarm lamp flashes fifteen moments and immediately after that launch it. The network details web-site will be printed.

When referring on the printout, verify out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or maybe the title of the wireless network) signifies the correct identify of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the application to make the most out of your Canon PIXMA MP499.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is nonetheless failing immediately after following this guidebook, please contact us for more support.

Printer MP499 Wireless Standard Connection Method

Remember to use the hyperlinks down under to verify out the right suggestions for the working strategy:

Printer MP499 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop or computer as soon as much more and click on (My Laptop) or (This Computer method), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not deliver the CD (’s) that came with your merchandise, be positive to get the manuals and application bundle.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection strategy, then click (Next).
  4. Select (Access Point Connection (advised)) as the wireless LAN connection strategy then click (Next).
  5. Ensure that your printer is turned on, make positive the green electrical power lamp is on and then click (Next).
  6. The application will now briefly search your network for any printers previously linked. If this is the to start with time you are setting up your printer, it will not be discovered. So please make certain that (Setting printer could not be found on the checklist) is chosen, then click (Next).
  7. The Setup Guide Installation will now start out.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two occasions and release immediately after the 2nd flash, then click (Next).
  11. Make positive that the blue Wi-Fi lamp flashes rapidly and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility level is finished click (Next).
  14. When the following display seems, decide on your area and click (Next).
  15. When the following display seems, decide on your language and then click (Next).
  16. If the subsequent display seems, choose out the plan you want to set up, then click on (Following). If you are uncertain which laptop or computer application you want to set up at this time, actually do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The application bundle will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer as soon as once again. Based on your neighborhood configuration, it may perhaps very well consider a minute or so for that application bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may be exhibited to indicate the solution inside of your printer as very well as recognize (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the to start with time you are spot up your printer, if the pursuing show is exhibited, click on (Execute) and observe the on-display instructions to achieve the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on making use of the Quick Menu application, so click (Cancel).
  24. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to total the set up.

This Printer MP499 Wireless the Windows setup

Should the wi-fi set up continues to be failing immediately after following this guidebook, make positive you get in touch with us for even much more assist.

Printer MP499 Wireless Cableless Setup strategy (For Mac customers only)

Before you start out, please download the installation software.

  1. Once downloaded, go to the spot of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MP499 Wireless
  2. When the following display is displayed, click Open.Printer MP499 Wireless
  3. When the original display seems, click on (Next).
  4. You may perhaps be asked to form in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection strategy and then click (Next).
  7. Select (Access Point Connection (advised)) as the wireless LAN connection strategy then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for virtually any printers now linked. If this can be the quite to start with time you may be spot up your printer, it’ll not be found. So try to remember to make positive that (Environment printer could not be located on the checklist) is chosen, then click (Next).
  10. If the following display seems, decide on (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two occasions and release immediately after the 2nd flash, and then click (Next).
  14. Make positive that the blue Wi-Fi lamp flashes rapidly and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the up coming message is displayed, click on (Allow).
  17. Once the connection to the accessibility level is finished click (Next).
  18. When the following display seems, decide on your area, and then click on (Next).
  19. When the following display seems, decide on your language and click (Next).
  20. When the following display seems, decide on the application you want to set up, and then click on (Next). If you are not positive which application you want to set up at this stage, do not get worried, as you can normally uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to build an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The application will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, decide on the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the quite to start with time you are surroundings up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on making use of the Quick Menu application, so click (Cancel).
  32. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to execute a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to total the set up.

This Printer MP499 Wireless the Mac setup

If the wireless setup is nonetheless failing immediately after following this guidebook, please contact us for more support.  or get Information from Official Website Canon