PIXMA Printer MG7140 Wireless Connection Setup

Canon PIXMA Printer MG7140 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (often referred to as routers or hubs) functions an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This permits permitted units this kind of as your Canon PIXMA MG7140 to attach on your network devoid of needing to enter a password, and it will allow a speedy and effortless process of connecting your units.

This technique is undoubtedly the easiest signifies of connecting your Printer MG7140 Wireless, so if your entry level has a WPS button, please choose the ‘WPS Connection Method’ tab underneath for directions on connecting creating use of this approach. If the router would not assistance WPS we have presented possibility pointers to have your Canon PIXMA MG7140 linked so please choose the ‘Standard Connection Method’ tab under.

Printer MG7140 Wireless

Printer MG7140 Wireless

Printer MG7140 Wireless WPS Connection Method

Ahead of we get started, some situations ought to be accomplished to function with the WPS press button approach:

  1. The entry challenge has to have an real bodily WPS drive button provided. Remember to examine along with your device’s shopper guidebook for specifics. In situation the WPS drive button is not obtainable, you need to make use of the suggestions to the Regular Connection Method tab.
  2. Your network ought to be employing the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the main with the printer until the orange alarm lamp flashes at the time just after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue just after which head to your entry spot and push the (WPS) button within two minutes. For true factors about pressing the WPS button, bear in mind to test with the accessibility challenge guide.

The blue Wi-Fi lamp all-around the printer will continue to keep on ?ash though in search of for, or connect in the direction of the accessibility spot. During the setup, the environmentally pleasant electrical energy lamp can even get started to flash. When the printer has produced a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is appropriately linked to your wi-fi network, you may possibly print out the local community configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized straightforward paper.
  • Press and hold the Cancel(MASTER) Cancel Button button right up until the orange alarm lamp flashes fifteen moments and just after that launch it. The network details web page will be printed.
Other Drivers & Software  Canon TR7520 Scanner Driver

When referring on the printout, test out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or probably the title of the wireless network) signifies the appropriate title of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the software program to make the most out of your Canon PIXMA MG7140.
  • If you do not have the set up CD that came with your product or service, please download the manuals and software.
  • If the wireless setup is nonetheless failing just after following this guidebook, please contact us for additional support.

Printer MG7140 Wireless Standard Connection Method

Remember to use the hyperlinks down under to test out the accurate suggestions for the working technique:

Printer MG7140 Wireless Standard Connection Method – For Windows consumers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the personal computer the moment far more and click on (My Laptop) or (This Computer process), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not offer the CD (’s) that came with your merchandise, be absolutely sure to get the manuals and software program bundle.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection technique, then click (Next).
  4. Select (Access Point Connection (encouraged)) as the wireless LAN connection technique then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green energy lamp is on and then click (Next).
  6. The software program will now briefly search your network for any printers previously linked. If this is the initial time you are setting up your printer, it will not be located. So please make certain that (Setting printer could not be found on the checklist) is picked, then click (Next).
  7. The Setup Guide Installation will now get started.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer right up until the orange alarm lamp flashes two instances and release just after the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes rapidly and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry level is finished click (Next).
  14. When the following display seems, choose your area and click (Next).
  15. When the following display seems, choose your language and then click (Next).
  16. If the subsequent display seems, choose out the plan you want to set up, then click on (Following). If you are uncertain which personal computer software program you want to set up at this time, seriously do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software program bundle will now place in. If the following check is exhibited during the set up, just click on (Redetect) to search for your printer the moment once more. Based on your local community configuration, it may possibly very well consider a minute or so for that software program bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may be exhibited to indicate the product or service inside your printer as very well as determine (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the initial time you are spot up your printer, if the pursuing show is exhibited, click on (Execute) and stick to the on-display instructions to achieve the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu software program, so click (Cancel).
  24. If you want to consider element in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to finish the set up.
Other Drivers & Software  PIXMA Printer MG7740 Wireless Connection Setup

This Printer MG7140 Wireless the Windows setup

Should the wi-fi set up continues to be failing just after following this guidebook, make absolutely sure you phone us for even far more assist.

Printer MG7140 Wireless Cableless Setup technique (For Mac consumers only)

Before you get started, please download the installation software.

  1. Once downloaded, go to the spot of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG7140 Wireless
  2. When the following display is displayed, click Open.Printer MG7140 Wireless
  3. When the original display seems, click on (Next).
  4. You may possibly be asked to sort in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection technique and then click (Next).
  7. Select (Access Point Connection (encouraged)) as the wireless LAN connection technique then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for nearly any printers now linked. If this can be the incredibly initial time you may be spot up your printer, it’ll not be identified. So bear in mind to make absolutely sure that (Environment printer could not be located on the checklist) is picked, then click (Next).
  10. If the following display seems, choose (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer right up until the orange alarm lamp flashes two instances and release just after the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes rapidly and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the entry level is finished click (Next).
  18. When the following display seems, choose your area, and then click on (Next).
  19. When the following display seems, choose your language and click (Next).
  20. When the following display seems, choose the software program you want to set up, and then click on (Next). If you are not absolutely sure which software program you want to set up at this stage, really don’t stress, as you can generally uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to generate an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software program will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, choose the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the incredibly initial time you are surroundings up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu software program, so click (Cancel).
  32. If you want to consider element in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to complete a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to finish the set up.
Other Drivers & Software  PIXMA Printer MX495 Wireless Connection Setup

This Printer MG7140 Wireless the Mac setup

If the wireless setup is nonetheless failing just after following this guidebook, please contact us for additional support.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG7140 Wireless Connection Setup

No votes so far! Be the first to rate this post.