PIXMA Printer MG6340 Wireless Connection Setup

Canon PIXMA Printer MG6340 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (in some cases referred to as routers or hubs) options an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This will allow permitted units this kind of as your Canon PIXMA MG6340 to attach on your network devoid of needing to enter a password, and it will allow a rapid and effortless technique of connecting your units.

This system is undoubtedly the easiest signifies of connecting your Printer MG6340 Wireless, so if your entry level has a WPS button, please pick the ‘WPS Connection Method’ tab underneath for directions on connecting creating use of this course of action. If the router would not assistance WPS we have offered selection pointers to have your Canon PIXMA MG6340 linked so please pick the ‘Standard Connection Method’ tab beneath.

Printer MG6340 Wireless

Printer MG6340 Wireless

Printer MG6340 Wireless WPS Connection Method

Ahead of we start out, some problems need to be accomplished to operate with the WPS press button course of action:

  1. The entry concern has to have an real bodily WPS drive button presented. Remember to examine along with your device’s client guidebook for specifics. In situation the WPS drive button is not obtainable, you need to make use of the suggestions to the Regular Connection Method tab.
  2. Your network need to be making use of the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and sustain the (Wi-Fi) button about the main with the printer until the orange alarm lamp flashes at the time just after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue just after which head to your entry area and push the (WPS) button within two minutes. For authentic facets about pressing the WPS button, bear in mind to examine with the accessibility concern guide.

The blue Wi-Fi lamp close to the printer will preserve on ?ash whilst looking for for, or connect in the direction of the accessibility area. During the setup, the environmentally pleasant electrical energy lamp can even start out to flash. When the printer has produced a connection to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is appropriately linked to your wi-fi network, you may well print out the neighborhood configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized uncomplicated paper.
  • Press and hold the Cancel(MASTER) Cancel Button button till the orange alarm lamp flashes fifteen moments and just after that launch it. The network information web site will be printed.
Other Drivers & Software  Canon IJ Setup Utility Software Download

When referring on the printout, examine out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or probably the title of the wireless network) signifies the suitable title of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the computer software to make the most out of your Canon PIXMA MG6340.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is even now failing just after following this guidebook, please contact us for even further help.

Printer MG6340 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to examine out the appropriate suggestions for the working system:

Printer MG6340 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the personal computer as soon as much more and click on (My Laptop) or (This Computer technique), select the CD-ROM and double-click (MSETUP4.EXE). If you do not supply the CD (’s) that came with your merchandise, be absolutely sure to get the manuals and computer software package deal.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection system, then click (Next).
  4. Select (Access Point Connection (advised)) as the wireless LAN connection system then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green energy lamp is on and then click (Next).
  6. The computer software will now briefly search your network for any printers currently linked. If this is the to start with time you are setting up your printer, it will not be uncovered. So please make sure that (Setting printer could not be situated on the record) is chosen, then click (Next).
  7. The Setup Guide Installation will now start out.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two instances and release just after the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes speedily and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry level is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, select out the system you want to set up, then click on (Following). If you are uncertain which personal computer computer software you want to set up at this time, genuinely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The computer software package deal will now place in. If the following keep track of is exhibited during the set up, just click on (Redetect) to search for your printer as soon as yet again. Based on your neighborhood configuration, it may well effectively get a minute or so for that computer software package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could be exhibited to indicate the solution inside your printer as effectively as recognize (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the to start with time you are spot up your printer, if the pursuing show is exhibited, click on (Execute) and observe the on-display instructions to achieve the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on making use of the Quick Menu computer software, so click (Cancel).
  24. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to comprehensive the set up.
Other Drivers & Software  Canon imageCLASS MF216n Wireless Setup

This Printer MG6340 Wireless the Windows setup

Should the wi-fi set up continues to be failing just after following this guidebook, make absolutely sure you phone us for even much more support.

Printer MG6340 Wireless Cableless Setup system (For Mac customers only)

Before you start out, please download the installation software.

  1. Once downloaded, go to the spot of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG6340 Wireless
  2. When the following display is displayed, click Open.Printer MG6340 Wireless
  3. When the original display seems, click on (Next).
  4. You may well be asked to sort in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection system and then click (Next).
  7. Select (Access Point Connection (advised)) as the wireless LAN connection system then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for pretty much any printers now linked. If this can be the pretty to start with time you could be spot up your printer, it’ll not be found. So bear in mind to make absolutely sure that (Environment printer could not be located on the record) is chosen, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two instances and release just after the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes speedily and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the upcoming message is displayed, click on (Allow).
  17. Once the connection to the entry level is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the computer software you want to set up, and then click on (Next). If you are not absolutely sure which computer software you want to set up at this stage, do not stress, as you can often uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to build an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The computer software will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the pretty to start with time you are natural environment up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on making use of the Quick Menu computer software, so click (Cancel).
  32. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to complete a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to comprehensive the set up.
Other Drivers & Software  PIXMA Printer MX924 Wireless Connection Setup

This Printer MG6340 Wireless the Mac setup

If the wireless setup is even now failing just after following this guidebook, please contact us for even further help.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG6340 Wireless Connection Setup

No votes so far! Be the first to rate this post.