PIXMA Printer MG5753 Wireless Connection Setup

By Posted on

Canon PIXMA Printer MG5753 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (at times referred to as routers or hubs) attributes an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This will allow permitted gadgets this kind of as your Canon PIXMA MG5753 to attach on your network devoid of needing to enter a password, and it will allow a quick and uncomplicated program of connecting your gadgets.

This technique is undoubtedly the easiest usually means of connecting your Printer MG5753 Wireless, so if your entry level has a WPS button, please pick the ‘WPS Connection Method’ tab underneath for directions on connecting building use of this system. If the router would not help WPS we have offered alternative suggestions to have your Canon PIXMA MG5753 linked so please pick the ‘Standard Connection Method’ tab under.

Printer MG5753 Wireless

Printer MG5753 Wireless

Printer MG5753 Wireless WPS Connection Method

Ahead of we begin, some circumstances ought to be attained to function with the WPS press button system:

  1. The entry situation has to have an real bodily WPS drive button made available. Remember to examine along with your device’s buyer manual for specifics. In situation the WPS drive button is not obtainable, you must employ the suggestions to the Regular Connection Method tab.
  2. Your network ought to be applying the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and retain the (Wi-Fi) button about the foremost with the printer until the orange alarm lamp flashes at the time soon after which you can launch it. Guarantee that the Wi-Fi button starts to flash blue soon after which head to your entry location and push the (WPS) button within two minutes. For serious factors about pressing the WPS button, bear in mind to examine with the accessibility situation guide.

The blue Wi-Fi lamp about the printer will hold on ?ash although trying to find for, or connect in direction of the accessibility location. During the setup, the environmentally pleasant electrical energy lamp can even begin to flash. When the printer has created a connection to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is the right way linked to your wi-fi network, you may well print out the local community configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized basic paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until finally the orange alarm lamp flashes fifteen moments and soon after that launch it. The network information website will be printed.

When referring on the printout, examine out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or probably the title of the wireless network) signifies the right title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the software program to make the most out of your Canon PIXMA MG5753.
  • If you do not have the set up CD that came with your merchandise, please download the manuals and software.
  • If the wireless setup is nonetheless failing soon after following this manual, please contact us for even more support.

Printer MG5753 Wireless Standard Connection Method

Remember to use the hyperlinks down under to examine out the right suggestions for the working technique:

Printer MG5753 Wireless Standard Connection Method – For Windows end users only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop as soon as far more and click on (My Laptop) or (This Computer program), select the CD-ROM and double-click (MSETUP4.EXE). If you do not offer the CD (’s) that came with your merchandise, be absolutely sure to receive the manuals and software program package deal.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection technique, then click (Next).
  4. Select (Access Point Connection (advisable)) as the wireless LAN connection technique then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green energy lamp is on and then click (Next).
  6. The software program will now briefly search your network for any printers currently linked. If this is the initially time you are setting up your printer, it will not be discovered. So please make certain that (Setting printer could not be found on the listing) is picked, then click (Next).
  7. The Setup Guide Installation will now begin.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until finally the orange alarm lamp flashes two instances and release soon after the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes rapidly and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry level is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, select out the system you want to set up, then click on (Following). If you are uncertain which laptop software program you want to set up at this time, seriously do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software program package deal will now place in. If the following keep track of is exhibited during the set up, just click on (Redetect) to search for your printer as soon as once again. Based on your local community configuration, it may well properly consider a minute or so for that software program package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may well be exhibited to indicate the merchandise inside your printer as properly as recognize (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the initially time you are spot up your printer, if the pursuing show is exhibited, click on (Execute) and adhere to the on-display instructions to complete the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu software program, so click (Cancel).
  24. If you want to consider aspect in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to total the set up.

This Printer MG5753 Wireless the Windows setup

Should the wi-fi set up continues to be failing soon after following this manual, make absolutely sure you get in touch with us for even far more enable.

Printer MG5753 Wireless Cableless Setup technique (For Mac end users only)

Before you begin, please download the installation software.

  1. Once downloaded, go to the spot of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG5753 Wireless
  2. When the following display is displayed, click Open.Printer MG5753 Wireless
  3. When the first display seems, click on (Next).
  4. You may well be asked to kind in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection technique and then click (Next).
  7. Select (Access Point Connection (advisable)) as the wireless LAN connection technique then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for nearly any printers now linked. If this can be the really initially time you may well be spot up your printer, it’ll not be identified. So bear in mind to make absolutely sure that (Environment printer could not be located on the listing) is picked, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until finally the orange alarm lamp flashes two instances and release soon after the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes rapidly and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the entry level is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the software program you want to set up, and then click on (Next). If you are not absolutely sure which software program you want to set up at this stage, do not get worried, as you can generally uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to generate an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software program will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the really initially time you are surroundings up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu software program, so click (Cancel).
  32. If you want to consider aspect in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to total the set up.

This Printer MG5753 Wireless the Mac setup

If the wireless setup is nonetheless failing soon after following this manual, please contact us for even more support.  or get Information from Official Website Canon

Related posts: