PIXMA Printer MG5640 Wireless Connection Setup

By Posted on

Canon PIXMA Printer MG5640 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (at times referred to as routers or hubs) functions an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This makes it possible for permitted units this kind of as your Canon PIXMA MG5640 to attach on your network devoid of needing to enter a password, and it will allow a rapid and straightforward procedure of connecting your units.

This process is undoubtedly the easiest indicates of connecting your Printer MG5640 Wireless, so if your accessibility stage has a WPS button, please pick the ‘WPS Connection Method’ tab underneath for directions on connecting creating use of this procedure. If the router would not help WPS we have supplied solution suggestions to have your Canon PIXMA MG5640 linked so please pick the ‘Standard Connection Method’ tab under.

Printer MG5640 Wireless

Printer MG5640 Wireless

Printer MG5640 Wireless WPS Connection Method

Ahead of we start out, some disorders will have to be accomplished to do the job with the WPS press button procedure:

  1. The accessibility concern has to have an real bodily WPS drive button made available. Remember to examine along with your device’s buyer manual for specifics. In situation the WPS drive button is not obtainable, you need to use the suggestions to the Regular Connection Method tab.
  2. Your network will have to be working with the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and retain the (Wi-Fi) button about the major with the printer until the orange alarm lamp flashes at the time following which you can launch it. Guarantee that the Wi-Fi button starts to flash blue following which head to your accessibility location and push the (WPS) button within two minutes. For actual facets about pressing the WPS button, don’t forget to check out with the accessibility concern guide.

The blue Wi-Fi lamp all around the printer will preserve on ?ash though searching for for, or connect in the direction of the accessibility location. During the setup, the environmentally pleasant electrical energy lamp can even start out to flash. When the printer has manufactured a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is properly linked to your wi-fi network, you may well print out the neighborhood configurations of one’s printer if you want:

  • Be certain that your printer is turned on.
  • Load a sheet of A4 or Letter-sized basic paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until eventually the orange alarm lamp flashes fifteen moments and following that launch it. The network details web-site will be printed.

When referring on the printout, check out out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or probably the title of the wireless network) signifies the right title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the computer software to make the most out of your Canon PIXMA MG5640.
  • If you do not have the set up CD that came with your products, please download the manuals and software.
  • If the wireless setup is nevertheless failing following following this manual, please contact us for even more support.

Printer MG5640 Wireless Standard Connection Method

Remember to use the hyperlinks down under to check out out the appropriate suggestions for the working process:

Printer MG5640 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop or computer when additional and click on (My Laptop) or (This Computer procedure), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not deliver the CD (’s) that came with your merchandise, be certain to receive the manuals and computer software bundle.
  2. When the preliminary display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection process, then click (Next).
  4. Select (Access Point Connection (advisable)) as the wireless LAN connection process then click (Next).
  5. Ensure that your printer is turned on, make certain the green energy lamp is on and then click (Next).
  6. The computer software will now briefly search your network for any printers currently linked. If this is the initial time you are setting up your printer, it will not be located. So please guarantee that (Setting printer could not be positioned on the record) is chosen, then click (Next).
  7. The Setup Guide Installation will now start out.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until eventually the orange alarm lamp flashes two instances and release following the 2nd flash, then click (Next).
  11. Make certain that the blue Wi-Fi lamp flashes immediately and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, choose out the system you want to set up, then click on (Following). If you are uncertain which laptop or computer computer software you want to set up at this time, genuinely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The computer software bundle will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer when once more. Based on your neighborhood configuration, it may well very well consider a minute or so for that computer software bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may possibly be exhibited to indicate the products inside of your printer as very well as recognize (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the initial time you are place up your printer, if the pursuing show is exhibited, click on (Execute) and comply with the on-display instructions to complete the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu computer software, so click (Cancel).
  24. If you want to consider element in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to full the set up.

This Printer MG5640 Wireless the Windows setup

Should the wi-fi set up continues to be failing following following this manual, make certain you phone us for even additional assist.

Printer MG5640 Wireless Cableless Setup process (For Mac customers only)

Before you start out, please download the installation software.

  1. Once downloaded, go to the place of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG5640 Wireless
  2. When the following display is displayed, click Open.Printer MG5640 Wireless
  3. When the preliminary display seems, click on (Next).
  4. You may well be asked to variety in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection process and then click (Next).
  7. Select (Access Point Connection (advisable)) as the wireless LAN connection process then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for just about any printers now linked. If this can be the incredibly initial time you may possibly be place up your printer, it’ll not be identified. So don’t forget to make certain that (Environment printer could not be located on the record) is chosen, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until eventually the orange alarm lamp flashes two instances and release following the 2nd flash, and then click (Next).
  14. Make certain that the blue Wi-Fi lamp flashes immediately and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the up coming message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the computer software you want to set up, and then click on (Next). If you are not certain which computer software you want to set up at this stage, really don’t stress, as you can normally uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to make an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The computer software will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the incredibly initial time you are atmosphere up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu computer software, so click (Cancel).
  32. If you want to consider element in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to execute a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to full the set up.

This Printer MG5640 Wireless the Mac setup

If the wireless setup is nevertheless failing following following this manual, please contact us for even more support.  or get Information from Official Website Canon

Related posts: