PIXMA Printer MG5540 Wireless Connection Setup

Canon PIXMA Printer MG5540 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (often referred to as routers or hubs) capabilities an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This enables permitted products this kind of as your Canon PIXMA MG5540 to attach on your network devoid of needing to enter a password, and it will allow a rapid and uncomplicated technique of connecting your products.

This system is undoubtedly the easiest implies of connecting your Printer MG5540 Wireless, so if your entry level has a WPS button, please decide on the ‘WPS Connection Method’ tab underneath for guidelines on connecting generating use of this system. If the router would not help WPS we have supplied alternative pointers to have your Canon PIXMA MG5540 linked so please decide on the ‘Standard Connection Method’ tab under.

Printer MG5540 Wireless

Printer MG5540 Wireless

Printer MG5540 Wireless WPS Connection Method

Ahead of we start out, some ailments will have to be accomplished to get the job done with the WPS press button system:

  1. The entry situation has to have an real bodily WPS drive button made available. Remember to examine along with your device’s buyer guidebook for specifics. In situation the WPS drive button is not obtainable, you must use the suggestions to the Regular Connection Method tab.
  2. Your network will have to be applying the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the major with the printer until the orange alarm lamp flashes at the time soon after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue soon after which head to your entry spot and push the (WPS) button within two minutes. For authentic elements about pressing the WPS button, bear in mind to check out with the accessibility situation guide.

The blue Wi-Fi lamp about the printer will retain on ?ash though trying to find for, or connect in direction of the accessibility spot. During the setup, the environmentally pleasant electrical electrical power lamp can even start out to flash. When the printer has created a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is properly linked to your wi-fi network, you may possibly print out the neighborhood configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized easy paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until finally the orange alarm lamp flashes fifteen moments and soon after that launch it. The network details web page will be printed.
Other Drivers & Software  PIXMA Printer MG6853 Wireless Connection Setup

When referring on the printout, check out out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or maybe the title of the wireless network) signifies the suitable identify of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the program to make the most out of your Canon PIXMA MG5540.
  • If you do not have the set up CD that came with your product or service, please download the manuals and software.
  • If the wireless setup is nevertheless failing soon after following this guidebook, please contact us for even more support.

Printer MG5540 Wireless Standard Connection Method

Remember to use the hyperlinks down under to check out out the right suggestions for the working system:

Printer MG5540 Wireless Standard Connection Method – For Windows consumers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop when extra and click on (My Laptop) or (This Computer technique), select the CD-ROM and double-click (MSETUP4.EXE). If you do not present the CD (’s) that came with your merchandise, be absolutely sure to acquire the manuals and program bundle.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection system, then click (Next).
  4. Select (Access Point Connection (proposed)) as the wireless LAN connection system then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green electrical power lamp is on and then click (Next).
  6. The program will now briefly search your network for any printers currently linked. If this is the very first time you are setting up your printer, it will not be uncovered. So please be certain that (Setting printer could not be situated on the listing) is chosen, then click (Next).
  7. The Setup Guide Installation will now start out.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until finally the orange alarm lamp flashes two occasions and release soon after the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes immediately and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry level is finished click (Next).
  14. When the following display seems, decide on your area and click (Next).
  15. When the following display seems, decide on your language and then click (Next).
  16. If the subsequent display seems, select out the plan you want to set up, then click on (Following). If you are uncertain which laptop program you want to set up at this time, definitely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The program bundle will now place in. If the following check is exhibited during the set up, just click on (Redetect) to search for your printer when once again. Based on your neighborhood configuration, it may possibly effectively consider a minute or so for that program bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could possibly be exhibited to indicate the product or service inside of your printer as effectively as recognize (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the very first time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and comply with the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu program, so click (Cancel).
  24. If you want to consider portion in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to finish the set up.
Other Drivers & Software  Canon PIXMA iP8760 Printer Drivers

This Printer MG5540 Wireless the Windows setup

Should the wi-fi set up continues to be failing soon after following this guidebook, make absolutely sure you get in touch with us for even extra assist.

Printer MG5540 Wireless Cableless Setup system (For Mac consumers only)

Before you start out, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG5540 Wireless
  2. When the following display is displayed, click Open.Printer MG5540 Wireless
  3. When the first display seems, click on (Next).
  4. You may possibly be asked to variety in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection system and then click (Next).
  7. Select (Access Point Connection (proposed)) as the wireless LAN connection system then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for just about any printers now linked. If this can be the extremely very first time you could possibly be area up your printer, it’ll not be identified. So bear in mind to make absolutely sure that (Environment printer could not be located on the listing) is chosen, then click (Next).
  10. If the following display seems, decide on (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until finally the orange alarm lamp flashes two occasions and release soon after the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes immediately and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the entry level is finished click (Next).
  18. When the following display seems, decide on your area, and then click on (Next).
  19. When the following display seems, decide on your language and click (Next).
  20. When the following display seems, decide on the program you want to set up, and then click on (Next). If you are not absolutely sure which program you want to set up at this stage, really do not be concerned, as you can constantly uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to generate an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The program will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, decide on the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the extremely very first time you are atmosphere up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu program, so click (Cancel).
  32. If you want to consider portion in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to execute a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to finish the set up.
Other Drivers & Software  Canon PIXMA TS3110 Driver Download

This Printer MG5540 Wireless the Mac setup

If the wireless setup is nevertheless failing soon after following this guidebook, please contact us for even more support.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG5540 Wireless Connection Setup

No votes so far! Be the first to rate this post.