PIXMA Printer MG5440 Wireless Connection Setup

Canon PIXMA Printer MG5440 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (from time to time referred to as routers or hubs) functions an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This lets permitted gadgets this kind of as your Canon PIXMA MG5440 to attach on your network devoid of needing to enter a password, and it will allow a quickly and effortless process of connecting your gadgets.

This strategy is undoubtedly the easiest suggests of connecting your Printer MG5440 Wireless, so if your accessibility stage has a WPS button, please decide on the ‘WPS Connection Method’ tab beneath for guidelines on connecting producing use of this method. If the router would not help WPS we have offered selection pointers to have your Canon PIXMA MG5440 linked so please decide on the ‘Standard Connection Method’ tab beneath.

Printer MG5440 Wireless

Printer MG5440 Wireless

Printer MG5440 Wireless WPS Connection Method

Ahead of we start off, some problems should be accomplished to function with the WPS press button method:

  1. The accessibility problem has to have an real bodily WPS drive button supplied. Remember to examine along with your device’s buyer guidebook for specifics. In situation the WPS drive button is not obtainable, you need to use the suggestions to the Regular Connection Method tab.
  2. Your network should be utilizing the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the main with the printer until the orange alarm lamp flashes at the time following which you can launch it. Guarantee that the Wi-Fi button starts to flash blue following which head to your accessibility location and push the (WPS) button within two minutes. For authentic facets about pressing the WPS button, recall to examine with the accessibility problem guide.

The blue Wi-Fi lamp all over the printer will hold on ?ash even though in search of for, or connect in the direction of the accessibility location. During the setup, the environmentally pleasant electrical electrical power lamp can even start off to flash. When the printer has produced a partnership to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is appropriately linked to your wi-fi network, you could print out the neighborhood configurations of one’s printer if you want:

  • Be positive that your printer is turned on.
  • Load a sheet of A4 or Letter-sized basic paper.
  • Press and hold the Cancel(MASTER) Cancel Button button till the orange alarm lamp flashes fifteen moments and following that launch it. The network information web-site will be printed.
Other Drivers & Software  IJ Network Device Setup Utility (macOS)

When referring on the printout, examine out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the right title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the application to make the most out of your Canon PIXMA MG5440.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is nevertheless failing following following this guidebook, please contact us for even further help.

Printer MG5440 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to examine out the proper suggestions for the working strategy:

Printer MG5440 Wireless Standard Connection Method – For Windows consumers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the computer system when a lot more and click on (My Laptop) or (This Computer process), select the CD-ROM and double-click (MSETUP4.EXE). If you do not supply the CD (’s) that came with your merchandise, be positive to acquire the manuals and application bundle.
  2. When the preliminary display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection strategy, then click (Next).
  4. Select (Access Point Connection (advised)) as the wireless LAN connection strategy then click (Next).
  5. Ensure that your printer is turned on, make positive the green electrical power lamp is on and then click (Next).
  6. The application will now briefly search your network for any printers previously linked. If this is the very first time you are setting up your printer, it will not be identified. So please assure that (Setting printer could not be found on the record) is picked, then click (Next).
  7. The Setup Guide Installation will now start off.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two occasions and release following the 2nd flash, then click (Next).
  11. Make positive that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, decide on your area and click (Next).
  15. When the following display seems, decide on your language and then click (Next).
  16. If the subsequent display seems, select out the plan you want to set up, then click on (Following). If you are uncertain which computer system application you want to set up at this time, seriously do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The application bundle will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer when yet again. Based on your neighborhood configuration, it could very well consider a minute or so for that application bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may well be exhibited to indicate the solution inside your printer as very well as determine (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the very first time you are place up your printer, if the pursuing show is exhibited, click on (Execute) and stick to the on-display instructions to complete the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on utilizing the Quick Menu application, so click (Cancel).
  24. If you want to consider element in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to total the set up.
Other Drivers & Software  Canon PIXMA MG6250 Driver Download

This Printer MG5440 Wireless the Windows setup

Should the wi-fi set up continues to be failing following following this guidebook, make positive you phone us for even a lot more enable.

Printer MG5440 Wireless Cableless Setup strategy (For Mac consumers only)

Before you start off, please download the installation software.

  1. Once downloaded, go to the place of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG5440 Wireless
  2. When the following display is displayed, click Open.Printer MG5440 Wireless
  3. When the preliminary display seems, click on (Next).
  4. You could be asked to style in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection strategy and then click (Next).
  7. Select (Access Point Connection (advised)) as the wireless LAN connection strategy then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for virtually any printers now linked. If this can be the incredibly very first time you may well be place up your printer, it’ll not be identified. So recall to make positive that (Environment printer could not be located on the record) is picked, then click (Next).
  10. If the following display seems, decide on (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two occasions and release following the 2nd flash, and then click (Next).
  14. Make positive that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the up coming message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, decide on your area, and then click on (Next).
  19. When the following display seems, decide on your language and click (Next).
  20. When the following display seems, decide on the application you want to set up, and then click on (Next). If you are not positive which application you want to set up at this stage, really do not be concerned, as you can constantly uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to build an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The application will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, decide on the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the incredibly very first time you are surroundings up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on utilizing the Quick Menu application, so click (Cancel).
  32. If you want to consider element in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to complete a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to total the set up.
Other Drivers & Software  PIXMA Printer MG6852 Wireless Connection Setup

This Printer MG5440 Wireless the Mac setup

If the wireless setup is nevertheless failing following following this guidebook, please contact us for even further help.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG5440 Wireless Connection Setup

No votes so far! Be the first to rate this post.