PIXMA Printer MG4240 Wireless Connection Setup

Canon PIXMA Printer MG4240 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (at times referred to as routers or hubs) options an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This will allow permitted units this kind of as your Canon PIXMA MG4240 to attach on your network devoid of needing to enter a password, and it will allow a quickly and uncomplicated method of connecting your units.

This strategy is undoubtedly the easiest signifies of connecting your Printer MG4240 Wireless, so if your entry stage has a WPS button, please choose the ‘WPS Connection Method’ tab below for directions on connecting creating use of this course of action. If the router would not help WPS we have presented solution tips to have your Canon PIXMA MG4240 linked so please choose the ‘Standard Connection Method’ tab under.

Printer MG4240 Wireless

Printer MG4240 Wireless

Printer MG4240 Wireless WPS Connection Method

Ahead of we commence, some disorders need to be attained to operate with the WPS press button course of action:

  1. The entry situation has to have an real bodily WPS drive button provided. Remember to examine along with your device’s client guidebook for specifics. In situation the WPS drive button is not obtainable, you ought to use the suggestions to the Regular Connection Method tab.
  2. Your network need to be applying the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the top with the printer until the orange alarm lamp flashes at the time following which you can launch it. Guarantee that the Wi-Fi button commences to flash blue following which head to your entry area and push the (WPS) button within two minutes. For actual factors about pressing the WPS button, keep in mind to verify with the accessibility situation guide.

The blue Wi-Fi lamp all-around the printer will preserve on ?ash even though trying to find for, or connect in direction of the accessibility area. During the setup, the environmentally pleasant electrical electrical power lamp can even commence to flash. When the printer has produced a partnership to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is effectively linked to your wi-fi network, you may perhaps print out the local community configurations of one’s printer if you want:

  • Be positive that your printer is turned on.
  • Load a sheet of A4 or Letter-sized basic paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until finally the orange alarm lamp flashes fifteen moments and following that launch it. The network information web site will be printed.
Other Drivers & Software  MX531 Scanner Driver Download

When referring on the printout, verify out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or probably the title of the wireless network) signifies the good title of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the software package to make the most out of your Canon PIXMA MG4240.
  • If you do not have the set up CD that came with your products, please download the manuals and software.
  • If the wireless setup is even now failing following following this guidebook, please contact us for even more support.

Printer MG4240 Wireless Standard Connection Method

Remember to use the hyperlinks down under to verify out the accurate suggestions for the working strategy:

Printer MG4240 Wireless Standard Connection Method – For Windows consumers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the pc the moment a lot more and click on (My Laptop) or (This Computer method), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not present the CD (’s) that came with your merchandise, be positive to get the manuals and software package package deal.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection strategy, then click (Next).
  4. Select (Access Point Connection (suggested)) as the wireless LAN connection strategy then click (Next).
  5. Ensure that your printer is turned on, make positive the green electrical power lamp is on and then click (Next).
  6. The software package will now briefly search your network for any printers presently linked. If this is the 1st time you are setting up your printer, it will not be identified. So please make sure that (Setting printer could not be situated on the listing) is chosen, then click (Next).
  7. The Setup Guide Installation will now commence.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until finally the orange alarm lamp flashes two occasions and release following the 2nd flash, then click (Next).
  11. Make positive that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry stage is finished click (Next).
  14. When the following display seems, choose your area and click (Next).
  15. When the following display seems, choose your language and then click (Next).
  16. If the subsequent display seems, choose out the system you want to set up, then click on (Following). If you are uncertain which pc software package you want to set up at this time, seriously do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software package package deal will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer the moment yet again. Based on your local community configuration, it may perhaps properly consider a minute or so for that software package package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may well be exhibited to indicate the products inside your printer as properly as determine (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the 1st time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and adhere to the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu software package, so click (Cancel).
  24. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to total the set up.
Other Drivers & Software  Canon MX432 Wireless Setup Printer

This Printer MG4240 Wireless the Windows setup

Should the wi-fi set up continues to be failing following following this guidebook, make positive you get in touch with us for even a lot more support.

Printer MG4240 Wireless Cableless Setup strategy (For Mac consumers only)

Before you commence, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG4240 Wireless
  2. When the following display is displayed, click Open.Printer MG4240 Wireless
  3. When the original display seems, click on (Next).
  4. You may perhaps be asked to style in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection strategy and then click (Next).
  7. Select (Access Point Connection (suggested)) as the wireless LAN connection strategy then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for pretty much any printers now linked. If this can be the really 1st time you may well be area up your printer, it’ll not be identified. So keep in mind to make positive that (Environment printer could not be located on the listing) is chosen, then click (Next).
  10. If the following display seems, choose (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until finally the orange alarm lamp flashes two occasions and release following the 2nd flash, and then click (Next).
  14. Make positive that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the upcoming message is displayed, click on (Allow).
  17. Once the connection to the entry stage is finished click (Next).
  18. When the following display seems, choose your area, and then click on (Next).
  19. When the following display seems, choose your language and click (Next).
  20. When the following display seems, choose the software package you want to set up, and then click on (Next). If you are not positive which software package you want to set up at this stage, really do not stress, as you can usually uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to make an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software package will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, choose the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the really 1st time you are surroundings up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu software package, so click (Cancel).
  32. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to total the set up.
Other Drivers & Software  imageCLASS LBP351dn Driver Download

This Printer MG4240 Wireless the Mac setup

If the wireless setup is even now failing following following this guidebook, please contact us for even more support.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG4240 Wireless Connection Setup

No votes so far! Be the first to rate this post.