PIXMA Printer MG3640 Wireless Connection Setup

By Posted on

Canon PIXMA Printer MG3640 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (from time to time referred to as routers or hubs) functions an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This makes it possible for permitted units this kind of as your Canon PIXMA MG3640 to attach on your network devoid of needing to enter a password, and it will allow a rapidly and straightforward technique of connecting your units.

This system is undoubtedly the easiest suggests of connecting your Printer MG3640 Wireless, so if your accessibility stage has a WPS button, please pick the ‘WPS Connection Method’ tab beneath for directions on connecting producing use of this method. If the router would not assistance WPS we have presented possibility suggestions to have your Canon PIXMA MG3640 linked so please pick the ‘Standard Connection Method’ tab under.

Printer MG3640 Wireless

Printer MG3640 Wireless

Printer MG3640 Wireless WPS Connection Method

Ahead of we begin, some ailments have to be attained to do the job with the WPS press button method:

  1. The accessibility challenge has to have an real bodily WPS drive button presented. Remember to examine along with your device’s customer guidebook for specifics. In situation the WPS drive button is not obtainable, you need to use the suggestions to the Regular Connection Method tab.
  2. Your network have to be employing the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the major with the printer until the orange alarm lamp flashes at the time immediately after which you can launch it. Guarantee that the Wi-Fi button starts to flash blue immediately after which head to your accessibility location and push the (WPS) button within two minutes. For actual facets about pressing the WPS button, recall to test with the accessibility challenge guide.

The blue Wi-Fi lamp close to the printer will retain on ?ash when looking for for, or connect in the direction of the accessibility location. During the setup, the environmentally pleasant electrical electrical power lamp can even begin to flash. When the printer has manufactured a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is accurately linked to your wi-fi network, you may perhaps print out the neighborhood configurations of one’s printer if you want:

  • Be certain that your printer is turned on.
  • Load a sheet of A4 or Letter-sized easy paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until eventually the orange alarm lamp flashes fifteen moments and immediately after that launch it. The network details website will be printed.

When referring on the printout, test out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the suitable title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the computer software to make the most out of your Canon PIXMA MG3640.
  • If you do not have the set up CD that came with your item, please download the manuals and software.
  • If the wireless setup is nonetheless failing immediately after following this guidebook, please contact us for more support.

Printer MG3640 Wireless Standard Connection Method

Remember to use the hyperlinks down under to test out the proper suggestions for the working system:

Printer MG3640 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the pc as soon as much more and click on (My Laptop) or (This Computer technique), select the CD-ROM and double-click (MSETUP4.EXE). If you do not offer the CD (’s) that came with your merchandise, be certain to acquire the manuals and computer software package deal.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection system, then click (Next).
  4. Select (Access Point Connection (encouraged)) as the wireless LAN connection system then click (Next).
  5. Ensure that your printer is turned on, make certain the green electrical power lamp is on and then click (Next).
  6. The computer software will now briefly search your network for any printers previously linked. If this is the initial time you are setting up your printer, it will not be uncovered. So please make sure that (Setting printer could not be positioned on the checklist) is picked, then click (Next).
  7. The Setup Guide Installation will now begin.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until eventually the orange alarm lamp flashes two occasions and release immediately after the 2nd flash, then click (Next).
  11. Make certain that the blue Wi-Fi lamp flashes rapidly and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, select out the system you want to set up, then click on (Following). If you are uncertain which pc computer software you want to set up at this time, truly do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The computer software package deal will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer as soon as once again. Based on your neighborhood configuration, it may perhaps properly consider a minute or so for that computer software package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may be exhibited to indicate the item inside of your printer as properly as recognize (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the initial time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and stick to the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu computer software, so click (Cancel).
  24. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to full the set up.

This Printer MG3640 Wireless the Windows setup

Should the wi-fi set up continues to be failing immediately after following this guidebook, make certain you contact us for even much more aid.

Printer MG3640 Wireless Cableless Setup system (For Mac customers only)

Before you begin, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG3640 Wireless
  2. When the following display is displayed, click Open.Printer MG3640 Wireless
  3. When the first display seems, click on (Next).
  4. You may perhaps be asked to style in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection system and then click (Next).
  7. Select (Access Point Connection (encouraged)) as the wireless LAN connection system then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for virtually any printers now linked. If this can be the pretty initial time you may be area up your printer, it’ll not be identified. So recall to make certain that (Environment printer could not be located on the checklist) is picked, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until eventually the orange alarm lamp flashes two occasions and release immediately after the 2nd flash, and then click (Next).
  14. Make certain that the blue Wi-Fi lamp flashes rapidly and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the computer software you want to set up, and then click on (Next). If you are not certain which computer software you want to set up at this stage, really do not stress, as you can generally uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to develop an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The computer software will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the pretty initial time you are natural environment up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu computer software, so click (Cancel).
  32. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to full the set up.

This Printer MG3640 Wireless the Mac setup

If the wireless setup is nonetheless failing immediately after following this guidebook, please contact us for more support.  or get Information from Official Website Canon

Related posts: