PIXMA Printer MG3550 Wireless Connection Setup

Canon PIXMA Printer MG3550 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (at times referred to as routers or hubs) capabilities an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This will allow permitted units this kind of as your Canon PIXMA MG3550 to attach on your network devoid of needing to enter a password, and it will allow a rapid and straightforward program of connecting your units.

This system is undoubtedly the easiest usually means of connecting your Printer MG3550 Wireless, so if your entry stage has a WPS button, please choose the ‘WPS Connection Method’ tab beneath for directions on connecting producing use of this procedure. If the router would not help WPS we have offered choice suggestions to have your Canon PIXMA MG3550 linked so please choose the ‘Standard Connection Method’ tab under.

Printer MG3550 Wireless

Printer MG3550 Wireless

Printer MG3550 Wireless WPS Connection Method

Ahead of we start out, some ailments need to be attained to function with the WPS press button procedure:

  1. The entry difficulty has to have an real bodily WPS drive button supplied. Remember to examine along with your device’s buyer guidebook for specifics. In situation the WPS drive button is not obtainable, you really should make use of the suggestions to the Regular Connection Method tab.
  2. Your network need to be utilizing the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and preserve the (Wi-Fi) button about the primary with the printer until the orange alarm lamp flashes at the time following which you can launch it. Guarantee that the Wi-Fi button commences to flash blue following which head to your entry area and push the (WPS) button within two minutes. For genuine elements about pressing the WPS button, try to remember to verify with the accessibility difficulty guide.

The blue Wi-Fi lamp all around the printer will preserve on ?ash whilst searching for for, or connect in the direction of the accessibility area. During the setup, the environmentally pleasant electrical electrical power lamp can even start out to flash. When the printer has manufactured a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is appropriately linked to your wi-fi network, you may perhaps print out the local community configurations of one’s printer if you want:

  • Be confident that your printer is turned on.
  • Load a sheet of A4 or Letter-sized straightforward paper.
  • Press and hold the Cancel(MASTER) Cancel Button button till the orange alarm lamp flashes fifteen moments and following that launch it. The network information internet site will be printed.
Other Drivers & Software  PIXMA Printer MX475 Wireless Connection Setup

When referring on the printout, verify out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the appropriate title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the application to make the most out of your Canon PIXMA MG3550.
  • If you do not have the set up CD that came with your item, please download the manuals and software.
  • If the wireless setup is nonetheless failing following following this guidebook, please contact us for even further help.

Printer MG3550 Wireless Standard Connection Method

Remember to use the hyperlinks down under to verify out the proper suggestions for the working system:

Printer MG3550 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop or computer the moment extra and click on (My Laptop) or (This Computer program), select the CD-ROM and double-click (MSETUP4.EXE). If you do not give the CD (’s) that came with your merchandise, be confident to acquire the manuals and application package deal.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection system, then click (Next).
  4. Select (Access Point Connection (suggested)) as the wireless LAN connection system then click (Next).
  5. Ensure that your printer is turned on, make confident the green electrical power lamp is on and then click (Next).
  6. The application will now briefly search your network for any printers currently linked. If this is the initial time you are setting up your printer, it will not be located. So please assure that (Setting printer could not be situated on the record) is chosen, then click (Next).
  7. The Setup Guide Installation will now start out.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two occasions and release following the 2nd flash, then click (Next).
  11. Make confident that the blue Wi-Fi lamp flashes promptly and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry stage is finished click (Next).
  14. When the following display seems, choose your area and click (Next).
  15. When the following display seems, choose your language and then click (Next).
  16. If the subsequent display seems, select out the plan you want to set up, then click on (Following). If you are uncertain which laptop or computer application you want to set up at this time, genuinely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The application package deal will now place in. If the following check is exhibited during the set up, just click on (Redetect) to search for your printer the moment yet again. Based on your local community configuration, it may perhaps effectively consider a minute or so for that application package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may well be exhibited to indicate the item inside of your printer as effectively as recognize (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the initial time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and observe the on-display instructions to achieve the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on utilizing the Quick Menu application, so click (Cancel).
  24. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to total the set up.
Other Drivers & Software  PIXMA Printer MG6450 Wireless Connection Setup

This Printer MG3550 Wireless the Windows setup

Should the wi-fi set up continues to be failing following following this guidebook, make confident you phone us for even extra aid.

Printer MG3550 Wireless Cableless Setup system (For Mac customers only)

Before you start out, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG3550 Wireless
  2. When the following display is displayed, click Open.Printer MG3550 Wireless
  3. When the first display seems, click on (Next).
  4. You may perhaps be asked to sort in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection system and then click (Next).
  7. Select (Access Point Connection (suggested)) as the wireless LAN connection system then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for practically any printers now linked. If this can be the extremely initial time you may well be area up your printer, it’ll not be found. So try to remember to make confident that (Environment printer could not be located on the record) is chosen, then click (Next).
  10. If the following display seems, choose (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two occasions and release following the 2nd flash, and then click (Next).
  14. Make confident that the blue Wi-Fi lamp flashes promptly and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the subsequent message is displayed, click on (Allow).
  17. Once the connection to the entry stage is finished click (Next).
  18. When the following display seems, choose your area, and then click on (Next).
  19. When the following display seems, choose your language and click (Next).
  20. When the following display seems, choose the application you want to set up, and then click on (Next). If you are not confident which application you want to set up at this stage, do not be concerned, as you can constantly uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to generate an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The application will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, choose the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the extremely initial time you are natural environment up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on utilizing the Quick Menu application, so click (Cancel).
  32. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to execute a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to total the set up.
Other Drivers & Software  Canon TS6220 Scanner Software Drivers

This Printer MG3550 Wireless the Mac setup

If the wireless setup is nonetheless failing following following this guidebook, please contact us for even further help.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG3550 Wireless Connection Setup

No votes so far! Be the first to rate this post.