PIXMA Printer MG3540 Wireless Connection Setup

By Posted on

Canon PIXMA Printer MG3540 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (occasionally referred to as routers or hubs) capabilities an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This permits permitted products this kind of as your Canon PIXMA MG3540 to attach on your network devoid of needing to enter a password, and it will allow a speedy and straightforward technique of connecting your products.

This technique is undoubtedly the easiest implies of connecting your Printer MG3540 Wireless, so if your entry stage has a WPS button, please decide on the ‘WPS Connection Method’ tab underneath for directions on connecting building use of this method. If the router would not assistance WPS we have presented selection pointers to have your Canon PIXMA MG3540 linked so please decide on the ‘Standard Connection Method’ tab beneath.

Printer MG3540 Wireless

Printer MG3540 Wireless

Printer MG3540 Wireless WPS Connection Method

Ahead of we start out, some situations will have to be attained to get the job done with the WPS press button method:

  1. The entry difficulty has to have an real bodily WPS drive button supplied. Remember to examine along with your device’s customer manual for specifics. In situation the WPS drive button is not obtainable, you must make use of the suggestions to the Regular Connection Method tab.
  2. Your network will have to be working with the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the main with the printer until the orange alarm lamp flashes at the time just after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue just after which head to your entry location and push the (WPS) button within two minutes. For genuine facets about pressing the WPS button, don’t forget to check out with the accessibility difficulty guide.

The blue Wi-Fi lamp close to the printer will hold on ?ash even though trying to find for, or connect in direction of the accessibility location. During the setup, the environmentally pleasant electrical electrical power lamp can even start out to flash. When the printer has created a connection to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is the right way linked to your wi-fi network, you may possibly print out the neighborhood configurations of one’s printer if you want:

  • Be confident that your printer is turned on.
  • Load a sheet of A4 or Letter-sized uncomplicated paper.
  • Press and hold the Cancel(MASTER) Cancel Button button till the orange alarm lamp flashes fifteen moments and just after that launch it. The network details web site will be printed.

When referring on the printout, check out out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the suitable title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the application to make the most out of your Canon PIXMA MG3540.
  • If you do not have the set up CD that came with your merchandise, please download the manuals and software.
  • If the wireless setup is even now failing just after following this manual, please contact us for even further support.

Printer MG3540 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to check out out the appropriate suggestions for the working technique:

Printer MG3540 Wireless Standard Connection Method – For Windows end users only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the pc when far more and click on (My Laptop) or (This Computer technique), select the CD-ROM and double-click (MSETUP4.EXE). If you do not offer the CD (’s) that came with your merchandise, be confident to acquire the manuals and application bundle.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection technique, then click (Next).
  4. Select (Access Point Connection (advisable)) as the wireless LAN connection technique then click (Next).
  5. Ensure that your printer is turned on, make confident the green electrical power lamp is on and then click (Next).
  6. The application will now briefly search your network for any printers currently linked. If this is the initial time you are setting up your printer, it will not be identified. So please make sure that (Setting printer could not be situated on the listing) is chosen, then click (Next).
  7. The Setup Guide Installation will now start out.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two occasions and release just after the 2nd flash, then click (Next).
  11. Make confident that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry stage is finished click (Next).
  14. When the following display seems, decide on your area and click (Next).
  15. When the following display seems, decide on your language and then click (Next).
  16. If the subsequent display seems, select out the plan you want to set up, then click on (Following). If you are uncertain which pc application you want to set up at this time, actually do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The application bundle will now place in. If the following keep track of is exhibited during the set up, just click on (Redetect) to search for your printer when yet again. Based on your neighborhood configuration, it may possibly very well consider a minute or so for that application bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could possibly be exhibited to indicate the merchandise inside of your printer as very well as determine (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the initial time you are place up your printer, if the pursuing show is exhibited, click on (Execute) and adhere to the on-display instructions to complete the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu application, so click (Cancel).
  24. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to comprehensive the set up.

This Printer MG3540 Wireless the Windows setup

Should the wi-fi set up continues to be failing just after following this manual, make confident you get in touch with us for even far more assistance.

Printer MG3540 Wireless Cableless Setup technique (For Mac end users only)

Before you start out, please download the installation software.

  1. Once downloaded, go to the place of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG3540 Wireless
  2. When the following display is displayed, click Open.Printer MG3540 Wireless
  3. When the original display seems, click on (Next).
  4. You may possibly be asked to sort in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection technique and then click (Next).
  7. Select (Access Point Connection (advisable)) as the wireless LAN connection technique then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for nearly any printers now linked. If this can be the extremely initial time you could possibly be place up your printer, it’ll not be identified. So don’t forget to make confident that (Environment printer could not be located on the listing) is chosen, then click (Next).
  10. If the following display seems, decide on (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two occasions and release just after the 2nd flash, and then click (Next).
  14. Make confident that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the entry stage is finished click (Next).
  18. When the following display seems, decide on your area, and then click on (Next).
  19. When the following display seems, decide on your language and click (Next).
  20. When the following display seems, decide on the application you want to set up, and then click on (Next). If you are not confident which application you want to set up at this stage, really do not fret, as you can constantly uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to make an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The application will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, decide on the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the extremely initial time you are natural environment up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu application, so click (Cancel).
  32. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to comprehensive the set up.

This Printer MG3540 Wireless the Mac setup

If the wireless setup is even now failing just after following this manual, please contact us for even further support.  or get Information from Official Website Canon

Related posts: