PIXMA Printer MG3240 Wireless Connection Setup

Canon PIXMA Printer MG3240 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (at times referred to as routers or hubs) capabilities an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This lets permitted products this kind of as your Canon PIXMA MG3240 to attach on your network devoid of needing to enter a password, and it will allow a speedy and uncomplicated technique of connecting your products.

This process is undoubtedly the easiest signifies of connecting your Printer MG3240 Wireless, so if your entry level has a WPS button, please pick the ‘WPS Connection Method’ tab underneath for directions on connecting generating use of this approach. If the router would not help WPS we have supplied choice pointers to have your Canon PIXMA MG3240 linked so please pick the ‘Standard Connection Method’ tab beneath.

Printer MG3240 Wireless

Printer MG3240 Wireless

Printer MG3240 Wireless WPS Connection Method

Ahead of we get started, some situations have to be attained to perform with the WPS press button approach:

  1. The entry concern has to have an real bodily WPS drive button made available. Remember to examine along with your device’s buyer manual for specifics. In situation the WPS drive button is not obtainable, you must use the suggestions to the Regular Connection Method tab.
  2. Your network have to be working with the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the major with the printer until the orange alarm lamp flashes at the time soon after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue soon after which head to your entry area and push the (WPS) button within two minutes. For genuine elements about pressing the WPS button, recall to verify with the accessibility concern guide.

The blue Wi-Fi lamp about the printer will continue to keep on ?ash even though looking for for, or connect in the direction of the accessibility area. During the setup, the environmentally pleasant electrical energy lamp can even get started to flash. When the printer has manufactured a partnership to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is appropriately linked to your wi-fi network, you might print out the neighborhood configurations of one’s printer if you want:

  • Be confident that your printer is turned on.
  • Load a sheet of A4 or Letter-sized easy paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until finally the orange alarm lamp flashes fifteen moments and soon after that launch it. The network information internet site will be printed.
Other Drivers & Software  MAXIFY iB4020 Wireless Support

When referring on the printout, verify out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or probably the title of the wireless network) signifies the good identify of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the computer software to make the most out of your Canon PIXMA MG3240.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is even now failing soon after following this manual, please contact us for more help.

Printer MG3240 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to verify out the appropriate suggestions for the working process:

Printer MG3240 Wireless Standard Connection Method – For Windows consumers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the pc when much more and click on (My Laptop) or (This Computer technique), select the CD-ROM and double-click (MSETUP4.EXE). If you do not deliver the CD (’s) that came with your merchandise, be confident to acquire the manuals and computer software package deal.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection process, then click (Next).
  4. Select (Access Point Connection (suggested)) as the wireless LAN connection process then click (Next).
  5. Ensure that your printer is turned on, make confident the green energy lamp is on and then click (Next).
  6. The computer software will now briefly search your network for any printers presently linked. If this is the 1st time you are setting up your printer, it will not be located. So please make sure that (Setting printer could not be found on the listing) is chosen, then click (Next).
  7. The Setup Guide Installation will now get started.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until finally the orange alarm lamp flashes two instances and release soon after the 2nd flash, then click (Next).
  11. Make confident that the blue Wi-Fi lamp flashes immediately and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry level is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, select out the plan you want to set up, then click on (Following). If you are uncertain which pc computer software you want to set up at this time, seriously do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The computer software package deal will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer when yet again. Based on your neighborhood configuration, it might very well consider a minute or so for that computer software package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may possibly be exhibited to indicate the solution inside your printer as very well as determine (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the 1st time you are spot up your printer, if the pursuing show is exhibited, click on (Execute) and adhere to the on-display instructions to complete the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu computer software, so click (Cancel).
  24. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to full the set up.
Other Drivers & Software  PIXMA Printer iP110 Wireless Connection Setup

This Printer MG3240 Wireless the Windows setup

Should the wi-fi set up continues to be failing soon after following this manual, make confident you contact us for even much more assistance.

Printer MG3240 Wireless Cableless Setup process (For Mac consumers only)

Before you get started, please download the installation software.

  1. Once downloaded, go to the spot of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG3240 Wireless
  2. When the following display is displayed, click Open.Printer MG3240 Wireless
  3. When the original display seems, click on (Next).
  4. You might be asked to variety in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection process and then click (Next).
  7. Select (Access Point Connection (suggested)) as the wireless LAN connection process then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for pretty much any printers now linked. If this can be the incredibly 1st time you may possibly be spot up your printer, it’ll not be identified. So recall to make confident that (Environment printer could not be located on the listing) is chosen, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until finally the orange alarm lamp flashes two instances and release soon after the 2nd flash, and then click (Next).
  14. Make confident that the blue Wi-Fi lamp flashes immediately and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the subsequent message is displayed, click on (Allow).
  17. Once the connection to the entry level is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the computer software you want to set up, and then click on (Next). If you are not confident which computer software you want to set up at this stage, do not be concerned, as you can normally uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to produce an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The computer software will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the incredibly 1st time you are surroundings up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu computer software, so click (Cancel).
  32. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to execute a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to full the set up.
Other Drivers & Software  PIXMA Printer iP8750 Wireless Connection Setup

This Printer MG3240 Wireless the Mac setup

If the wireless setup is even now failing soon after following this manual, please contact us for more help.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG3240 Wireless Connection Setup

No votes so far! Be the first to rate this post.