PIXMA Printer MG3140 Wireless Connection Setup

By Posted on

Canon PIXMA Printer MG3140 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (in some cases referred to as routers or hubs) characteristics an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This enables permitted units this kind of as your Canon PIXMA MG3140 to attach on your network devoid of needing to enter a password, and it will allow a rapid and simple program of connecting your units.

This approach is undoubtedly the easiest usually means of connecting your Printer MG3140 Wireless, so if your accessibility stage has a WPS button, please decide on the ‘WPS Connection Method’ tab below for directions on connecting generating use of this system. If the router would not help WPS we have presented alternative suggestions to have your Canon PIXMA MG3140 linked so please decide on the ‘Standard Connection Method’ tab under.

Printer MG3140 Wireless

Printer MG3140 Wireless

Printer MG3140 Wireless WPS Connection Method

Ahead of we begin, some situations will have to be accomplished to function with the WPS press button system:

  1. The accessibility problem has to have an real bodily WPS drive button provided. Remember to examine along with your device’s buyer manual for specifics. In situation the WPS drive button is not obtainable, you must employ the suggestions to the Regular Connection Method tab.
  2. Your network will have to be working with the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and preserve the (Wi-Fi) button about the top with the printer until the orange alarm lamp flashes at the time just after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue just after which head to your accessibility spot and push the (WPS) button within two minutes. For genuine elements about pressing the WPS button, recall to verify with the accessibility problem guide.

The blue Wi-Fi lamp about the printer will hold on ?ash when trying to find for, or connect in direction of the accessibility spot. During the setup, the environmentally pleasant electrical electrical power lamp can even begin to flash. When the printer has produced a romance to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is accurately linked to your wi-fi network, you may well print out the local community configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized easy paper.
  • Press and hold the Cancel(MASTER) Cancel Button button till the orange alarm lamp flashes fifteen moments and just after that launch it. The network details web page will be printed.

When referring on the printout, verify out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the right title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the software package to make the most out of your Canon PIXMA MG3140.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is nonetheless failing just after following this manual, please contact us for additional support.

Printer MG3140 Wireless Standard Connection Method

Remember to use the hyperlinks down under to verify out the proper suggestions for the working approach:

Printer MG3140 Wireless Standard Connection Method – For Windows end users only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop or computer the moment additional and click on (My Laptop) or (This Computer program), select the CD-ROM and double-click (MSETUP4.EXE). If you do not supply the CD (’s) that came with your merchandise, be absolutely sure to acquire the manuals and software package bundle.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection approach, then click (Next).
  4. Select (Access Point Connection (encouraged)) as the wireless LAN connection approach then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green electrical power lamp is on and then click (Next).
  6. The software package will now briefly search your network for any printers by now linked. If this is the initial time you are setting up your printer, it will not be discovered. So please guarantee that (Setting printer could not be positioned on the record) is chosen, then click (Next).
  7. The Setup Guide Installation will now begin.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two instances and release just after the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes immediately and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, decide on your area and click (Next).
  15. When the following display seems, decide on your language and then click (Next).
  16. If the subsequent display seems, select out the system you want to set up, then click on (Following). If you are uncertain which laptop or computer software package you want to set up at this time, truly do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software package bundle will now place in. If the following keep track of is exhibited all through the set up, just click on (Redetect) to search for your printer the moment yet again. Based on your local community configuration, it may well nicely get a minute or so for that software package bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could possibly be exhibited to indicate the solution inside of your printer as nicely as recognize (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the initial time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and stick to the on-display instructions to complete the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu software package, so click (Cancel).
  24. If you want to get element in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to total the set up.

This Printer MG3140 Wireless the Windows setup

Should the wi-fi set up continues to be failing just after following this manual, make absolutely sure you contact us for even additional aid.

Printer MG3140 Wireless Cableless Setup approach (For Mac end users only)

Before you begin, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG3140 Wireless
  2. When the following display is displayed, click Open.Printer MG3140 Wireless
  3. When the original display seems, click on (Next).
  4. You may well be asked to sort in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection approach and then click (Next).
  7. Select (Access Point Connection (encouraged)) as the wireless LAN connection approach then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for just about any printers now linked. If this can be the extremely initial time you could possibly be area up your printer, it’ll not be identified. So recall to make absolutely sure that (Environment printer could not be located on the record) is chosen, then click (Next).
  10. If the following display seems, decide on (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two instances and release just after the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes immediately and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the up coming message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, decide on your area, and then click on (Next).
  19. When the following display seems, decide on your language and click (Next).
  20. When the following display seems, decide on the software package you want to set up, and then click on (Next). If you are not absolutely sure which software package you want to set up at this stage, do not stress, as you can constantly uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to build an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software package will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, decide on the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the extremely initial time you are setting up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on working with the Quick Menu software package, so click (Cancel).
  32. If you want to get element in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to total the set up.

This Printer MG3140 Wireless the Mac setup

If the wireless setup is nonetheless failing just after following this manual, please contact us for additional support.  or get Information from Official Website Canon

Related posts: