PIXMA Printer MG3053 Wireless Connection Setup

Canon PIXMA Printer MG3053 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (from time to time referred to as routers or hubs) characteristics an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This makes it possible for permitted gadgets this kind of as your Canon PIXMA MG3053 to attach on your network devoid of needing to enter a password, and it will allow a rapid and quick method of connecting your gadgets.

This approach is undoubtedly the easiest indicates of connecting your Printer MG3053 Wireless, so if your entry level has a WPS button, please pick the ‘WPS Connection Method’ tab beneath for guidelines on connecting building use of this system. If the router would not assistance WPS we have offered possibility recommendations to have your Canon PIXMA MG3053 linked so please pick the ‘Standard Connection Method’ tab beneath.

Printer MG3053 Wireless

Printer MG3053 Wireless

Printer MG3053 Wireless WPS Connection Method

Ahead of we commence, some disorders have to be attained to operate with the WPS press button system:

  1. The entry concern has to have an real bodily WPS drive button supplied. Remember to examine along with your device’s customer manual for specifics. In situation the WPS drive button is not obtainable, you must use the suggestions to the Regular Connection Method tab.
  2. Your network have to be utilizing the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and retain the (Wi-Fi) button about the foremost with the printer until the orange alarm lamp flashes at the time immediately after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue immediately after which head to your entry spot and push the (WPS) button within two minutes. For actual facets about pressing the WPS button, recall to test with the accessibility concern guide.

The blue Wi-Fi lamp about the printer will maintain on ?ash even though looking for for, or connect in the direction of the accessibility spot. During the setup, the environmentally pleasant electrical electrical power lamp can even commence to flash. When the printer has manufactured a connection to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is appropriately linked to your wi-fi network, you may well print out the local community configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized straightforward paper.
  • Press and hold the Cancel(MASTER) Cancel Button button right up until the orange alarm lamp flashes fifteen moments and immediately after that launch it. The network details web page will be printed.
Other Drivers & Software  PIXMA Printer MX715 Wireless Connection Setup

When referring on the printout, test out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the suitable identify of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the program to make the most out of your Canon PIXMA MG3053.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is nonetheless failing immediately after following this manual, please contact us for additional help.

Printer MG3053 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to test out the proper suggestions for the working approach:

Printer MG3053 Wireless Standard Connection Method – For Windows end users only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the computer system as soon as additional and click on (My Laptop) or (This Computer method), select the CD-ROM and double-click (MSETUP4.EXE). If you do not present the CD (’s) that came with your merchandise, be absolutely sure to receive the manuals and program package deal.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection approach, then click (Next).
  4. Select (Access Point Connection (advised)) as the wireless LAN connection approach then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green electrical power lamp is on and then click (Next).
  6. The program will now briefly search your network for any printers currently linked. If this is the initially time you are setting up your printer, it will not be discovered. So please guarantee that (Setting printer could not be positioned on the record) is chosen, then click (Next).
  7. The Setup Guide Installation will now commence.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer right up until the orange alarm lamp flashes two instances and release immediately after the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry level is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, select out the system you want to set up, then click on (Following). If you are uncertain which computer system program you want to set up at this time, truly do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The program package deal will now place in. If the following check is exhibited during the set up, just click on (Redetect) to search for your printer as soon as yet again. Based on your local community configuration, it may well properly consider a minute or so for that program package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could possibly be exhibited to indicate the solution inside of your printer as properly as determine (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the initially time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and observe the on-display instructions to achieve the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on utilizing the Quick Menu program, so click (Cancel).
  24. If you want to consider element in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to finish the set up.
Other Drivers & Software  PIXMA Printer iX6840 Wireless Connection Setup

This Printer MG3053 Wireless the Windows setup

Should the wi-fi set up continues to be failing immediately after following this manual, make absolutely sure you phone us for even additional assistance.

Printer MG3053 Wireless Cableless Setup approach (For Mac end users only)

Before you commence, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG3053 Wireless
  2. When the following display is displayed, click Open.Printer MG3053 Wireless
  3. When the first display seems, click on (Next).
  4. You may well be asked to style in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection approach and then click (Next).
  7. Select (Access Point Connection (advised)) as the wireless LAN connection approach then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for pretty much any printers now linked. If this can be the quite initially time you could possibly be area up your printer, it’ll not be found. So recall to make absolutely sure that (Environment printer could not be located on the record) is chosen, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer right up until the orange alarm lamp flashes two instances and release immediately after the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes speedily and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the upcoming message is displayed, click on (Allow).
  17. Once the connection to the entry level is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the program you want to set up, and then click on (Next). If you are not absolutely sure which program you want to set up at this stage, really don’t stress, as you can often uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to generate an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The program will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the quite initially time you are natural environment up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on utilizing the Quick Menu program, so click (Cancel).
  32. If you want to consider element in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to execute a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to finish the set up.
Other Drivers & Software  Canon MP490 Scanner Driver

This Printer MG3053 Wireless the Mac setup

If the wireless setup is nonetheless failing immediately after following this manual, please contact us for additional help.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG3053 Wireless Connection Setup

No votes so far! Be the first to rate this post.