PIXMA Printer MG3052 Wireless Connection Setup

Canon PIXMA Printer MG3052 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (occasionally referred to as routers or hubs) capabilities an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This enables permitted gadgets this kind of as your Canon PIXMA MG3052 to attach on your network devoid of needing to enter a password, and it will allow a rapid and effortless technique of connecting your gadgets.

This technique is undoubtedly the easiest implies of connecting your Printer MG3052 Wireless, so if your accessibility stage has a WPS button, please decide on the ‘WPS Connection Method’ tab beneath for guidelines on connecting generating use of this course of action. If the router would not assistance WPS we have presented alternative pointers to have your Canon PIXMA MG3052 linked so please decide on the ‘Standard Connection Method’ tab beneath.

Printer MG3052 Wireless

Printer MG3052 Wireless

Printer MG3052 Wireless WPS Connection Method

Ahead of we start off, some situations should be accomplished to function with the WPS press button course of action:

  1. The accessibility problem has to have an real bodily WPS drive button presented. Remember to examine along with your device’s customer manual for specifics. In situation the WPS drive button is not obtainable, you need to use the suggestions to the Regular Connection Method tab.
  2. Your network should be applying the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and preserve the (Wi-Fi) button about the top with the printer until the orange alarm lamp flashes at the time right after which you can launch it. Guarantee that the Wi-Fi button starts to flash blue right after which head to your accessibility area and push the (WPS) button within two minutes. For genuine facets about pressing the WPS button, recall to verify with the accessibility problem guide.

The blue Wi-Fi lamp all-around the printer will preserve on ?ash when in search of for, or connect in the direction of the accessibility area. During the setup, the environmentally pleasant electrical energy lamp can even start off to flash. When the printer has manufactured a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is effectively linked to your wi-fi network, you may well print out the neighborhood configurations of one’s printer if you want:

  • Be certain that your printer is turned on.
  • Load a sheet of A4 or Letter-sized straightforward paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until eventually the orange alarm lamp flashes fifteen moments and right after that launch it. The network details web-site will be printed.
Other Drivers & Software  PIXMA MG6320 Wireless Support

When referring on the printout, verify out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or maybe the title of the wireless network) signifies the good title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the application to make the most out of your Canon PIXMA MG3052.
  • If you do not have the set up CD that came with your products, please download the manuals and software.
  • If the wireless setup is nevertheless failing right after following this manual, please contact us for even more help.

Printer MG3052 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to verify out the right suggestions for the working technique:

Printer MG3052 Wireless Standard Connection Method – For Windows end users only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the computer system as soon as much more and click on (My Laptop) or (This Computer technique), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not supply the CD (’s) that came with your merchandise, be certain to receive the manuals and application package deal.
  2. When the preliminary display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection technique, then click (Next).
  4. Select (Access Point Connection (suggested)) as the wireless LAN connection technique then click (Next).
  5. Ensure that your printer is turned on, make certain the green energy lamp is on and then click (Next).
  6. The application will now briefly search your network for any printers previously linked. If this is the 1st time you are setting up your printer, it will not be discovered. So please be certain that (Setting printer could not be positioned on the listing) is picked, then click (Next).
  7. The Setup Guide Installation will now start off.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until eventually the orange alarm lamp flashes two instances and release right after the 2nd flash, then click (Next).
  11. Make certain that the blue Wi-Fi lamp flashes speedily and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, decide on your area and click (Next).
  15. When the following display seems, decide on your language and then click (Next).
  16. If the subsequent display seems, choose out the plan you want to set up, then click on (Following). If you are uncertain which computer system application you want to set up at this time, seriously do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The application package deal will now place in. If the following keep track of is exhibited all through the set up, just click on (Redetect) to search for your printer as soon as yet again. Based on your neighborhood configuration, it may well nicely consider a minute or so for that application package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could be exhibited to indicate the products inside your printer as nicely as determine (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the 1st time you are place up your printer, if the pursuing show is exhibited, click on (Execute) and comply with the on-display instructions to complete the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu application, so click (Cancel).
  24. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to full the set up.
Other Drivers & Software  PIXMA Printer MG5550 Wireless Connection Setup

This Printer MG3052 Wireless the Windows setup

Should the wi-fi set up continues to be failing right after following this manual, make certain you contact us for even much more enable.

Printer MG3052 Wireless Cableless Setup technique (For Mac end users only)

Before you start off, please download the installation software.

  1. Once downloaded, go to the place of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG3052 Wireless
  2. When the following display is displayed, click Open.Printer MG3052 Wireless
  3. When the preliminary display seems, click on (Next).
  4. You may well be asked to sort in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection technique and then click (Next).
  7. Select (Access Point Connection (suggested)) as the wireless LAN connection technique then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for virtually any printers now linked. If this can be the pretty 1st time you could be place up your printer, it’ll not be identified. So recall to make certain that (Environment printer could not be located on the listing) is picked, then click (Next).
  10. If the following display seems, decide on (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until eventually the orange alarm lamp flashes two instances and release right after the 2nd flash, and then click (Next).
  14. Make certain that the blue Wi-Fi lamp flashes speedily and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, decide on your area, and then click on (Next).
  19. When the following display seems, decide on your language and click (Next).
  20. When the following display seems, decide on the application you want to set up, and then click on (Next). If you are not certain which application you want to set up at this stage, really don’t fear, as you can generally uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to develop an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The application will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, decide on the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the pretty 1st time you are natural environment up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu application, so click (Cancel).
  32. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to full the set up.
Other Drivers & Software  PIXMA Printer MP499 Wireless Connection Setup

This Printer MG3052 Wireless the Mac setup

If the wireless setup is nevertheless failing right after following this manual, please contact us for even more help.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG3052 Wireless Connection Setup

No votes so far! Be the first to rate this post.