PIXMA Printer MG3040 Wireless Connection Setup

Canon PIXMA Printer MG3040 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (occasionally referred to as routers or hubs) attributes an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This enables permitted units this kind of as your Canon PIXMA MG3040 to attach on your network devoid of needing to enter a password, and it will allow a rapid and simple method of connecting your units.

This approach is undoubtedly the easiest suggests of connecting your Printer MG3040 Wireless, so if your accessibility stage has a WPS button, please pick the ‘WPS Connection Method’ tab below for directions on connecting creating use of this approach. If the router would not help WPS we have supplied choice suggestions to have your Canon PIXMA MG3040 linked so please pick the ‘Standard Connection Method’ tab beneath.

Printer MG3040 Wireless

Printer MG3040 Wireless

Printer MG3040 Wireless WPS Connection Method

Ahead of we get started, some problems ought to be accomplished to do the job with the WPS press button approach:

  1. The accessibility difficulty has to have an real bodily WPS drive button presented. Remember to examine along with your device’s customer manual for specifics. In situation the WPS drive button is not obtainable, you really should employ the suggestions to the Regular Connection Method tab.
  2. Your network ought to be applying the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and retain the (Wi-Fi) button about the top with the printer until the orange alarm lamp flashes at the time soon after which you can launch it. Guarantee that the Wi-Fi button starts to flash blue soon after which head to your accessibility location and push the (WPS) button within two minutes. For genuine facets about pressing the WPS button, bear in mind to verify with the accessibility difficulty guide.

The blue Wi-Fi lamp all around the printer will hold on ?ash although trying to find for, or connect in direction of the accessibility location. During the setup, the environmentally pleasant electrical energy lamp can even get started to flash. When the printer has created a connection to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is effectively linked to your wi-fi network, you may well print out the neighborhood configurations of one’s printer if you want:

  • Be positive that your printer is turned on.
  • Load a sheet of A4 or Letter-sized straightforward paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until eventually the orange alarm lamp flashes fifteen moments and soon after that launch it. The network details web-site will be printed.
Other Drivers & Software  Canon MG8220 Scanner Driver

When referring on the printout, verify out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or maybe the title of the wireless network) signifies the appropriate title of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the computer software to make the most out of your Canon PIXMA MG3040.
  • If you do not have the set up CD that came with your item, please download the manuals and software.
  • If the wireless setup is even now failing soon after following this manual, please contact us for even further support.

Printer MG3040 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to verify out the right suggestions for the working approach:

Printer MG3040 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop when extra and click on (My Laptop) or (This Computer method), select the CD-ROM and double-click (MSETUP4.EXE). If you do not give the CD (’s) that came with your merchandise, be positive to get the manuals and computer software bundle.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection approach, then click (Next).
  4. Select (Access Point Connection (advised)) as the wireless LAN connection approach then click (Next).
  5. Ensure that your printer is turned on, make positive the green energy lamp is on and then click (Next).
  6. The computer software will now briefly search your network for any printers currently linked. If this is the very first time you are setting up your printer, it will not be identified. So please make certain that (Setting printer could not be positioned on the listing) is picked, then click (Next).
  7. The Setup Guide Installation will now get started.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until eventually the orange alarm lamp flashes two occasions and release soon after the 2nd flash, then click (Next).
  11. Make positive that the blue Wi-Fi lamp flashes speedily and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, select out the system you want to set up, then click on (Following). If you are uncertain which laptop computer software you want to set up at this time, genuinely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The computer software bundle will now place in. If the following keep track of is exhibited during the set up, just click on (Redetect) to search for your printer when yet again. Based on your neighborhood configuration, it may well very well consider a minute or so for that computer software bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could be exhibited to indicate the item inside your printer as very well as recognize (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the very first time you are spot up your printer, if the pursuing show is exhibited, click on (Execute) and adhere to the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu computer software, so click (Cancel).
  24. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to comprehensive the set up.
Other Drivers & Software  PIXMA Printer iP7250 Wireless Connection Setup

This Printer MG3040 Wireless the Windows setup

Should the wi-fi set up continues to be failing soon after following this manual, make positive you get in touch with us for even extra enable.

Printer MG3040 Wireless Cableless Setup approach (For Mac customers only)

Before you get started, please download the installation software.

  1. Once downloaded, go to the spot of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG3040 Wireless
  2. When the following display is displayed, click Open.Printer MG3040 Wireless
  3. When the first display seems, click on (Next).
  4. You may well be asked to form in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection approach and then click (Next).
  7. Select (Access Point Connection (advised)) as the wireless LAN connection approach then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for nearly any printers now linked. If this can be the pretty very first time you could be spot up your printer, it’ll not be found. So bear in mind to make positive that (Environment printer could not be located on the listing) is picked, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until eventually the orange alarm lamp flashes two occasions and release soon after the 2nd flash, and then click (Next).
  14. Make positive that the blue Wi-Fi lamp flashes speedily and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the computer software you want to set up, and then click on (Next). If you are not positive which computer software you want to set up at this stage, really don’t be concerned, as you can often uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to make an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The computer software will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the pretty very first time you are setting up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu computer software, so click (Cancel).
  32. If you want to consider component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to comprehensive the set up.
Other Drivers & Software  Canon MAXIFY MB5480 Driver Download

This Printer MG3040 Wireless the Mac setup

If the wireless setup is even now failing soon after following this manual, please contact us for even further support.  or get Information from Official Website Canon

Rating

0

( 0 Votes )
Please Rate!
PIXMA Printer MG3040 Wireless Connection Setup

No votes so far! Be the first to rate this post.