PIXMA Printer MG2940 Wireless Connection Setup

Posted on

Canon PIXMA Printer MG2940 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (from time to time referred to as routers or hubs) characteristics an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This will allow permitted products this kind of as your Canon PIXMA MG2940 to attach on your network devoid of needing to enter a password, and it will allow a rapidly and uncomplicated method of connecting your products.

This system is undoubtedly the easiest suggests of connecting your Printer MG2940 Wireless, so if your entry stage has a WPS button, please decide on the ‘WPS Connection Method’ tab below for guidelines on connecting generating use of this approach. If the router would not help WPS we have presented choice pointers to have your Canon PIXMA MG2940 linked so please decide on the ‘Standard Connection Method’ tab beneath.

Printer MG2940 Wireless

Printer MG2940 Wireless

Printer MG2940 Wireless WPS Connection Method

Ahead of we start off, some ailments have to be accomplished to do the job with the WPS press button approach:

  1. The entry challenge has to have an real bodily WPS drive button provided. Remember to examine along with your device’s client manual for specifics. In situation the WPS drive button is not obtainable, you must employ the suggestions to the Regular Connection Method tab.
  2. Your network have to be employing the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and sustain the (Wi-Fi) button about the top with the printer until the orange alarm lamp flashes at the time right after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue right after which head to your entry location and push the (WPS) button within two minutes. For genuine elements about pressing the WPS button, recall to verify with the accessibility challenge guide.

The blue Wi-Fi lamp about the printer will retain on ?ash though in search of for, or connect in the direction of the accessibility location. During the setup, the environmentally pleasant electrical electrical power lamp can even start off to flash. When the printer has created a romance to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is appropriately linked to your wi-fi network, you could print out the local community configurations of one’s printer if you want:

  • Be absolutely sure that your printer is turned on.
  • Load a sheet of A4 or Letter-sized easy paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until eventually the orange alarm lamp flashes fifteen moments and right after that launch it. The network details web-site will be printed.

When referring on the printout, verify out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the correct identify of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the software package to make the most out of your Canon PIXMA MG2940.
  • If you do not have the set up CD that came with your products, please download the manuals and software.
  • If the wireless setup is nevertheless failing right after following this manual, please contact us for more support.

Printer MG2940 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to verify out the proper suggestions for the working system:

Printer MG2940 Wireless Standard Connection Method – For Windows customers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop or computer when extra and click on (My Laptop) or (This Computer method), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not offer the CD (’s) that came with your merchandise, be absolutely sure to acquire the manuals and software package package deal.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection system, then click (Next).
  4. Select (Access Point Connection (suggested)) as the wireless LAN connection system then click (Next).
  5. Ensure that your printer is turned on, make absolutely sure the green electrical power lamp is on and then click (Next).
  6. The software package will now briefly search your network for any printers previously linked. If this is the initial time you are setting up your printer, it will not be uncovered. So please be certain that (Setting printer could not be situated on the checklist) is picked, then click (Next).
  7. The Setup Guide Installation will now start off.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until eventually the orange alarm lamp flashes two instances and release right after the 2nd flash, then click (Next).
  11. Make absolutely sure that the blue Wi-Fi lamp flashes promptly and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry stage is finished click (Next).
  14. When the following display seems, decide on your area and click (Next).
  15. When the following display seems, decide on your language and then click (Next).
  16. If the subsequent display seems, choose out the system you want to set up, then click on (Following). If you are uncertain which laptop or computer software package you want to set up at this time, truly do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software package package deal will now place in. If the following keep track of is exhibited all through the set up, just click on (Redetect) to search for your printer when yet again. Based on your local community configuration, it could properly consider a minute or so for that software package package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may be exhibited to indicate the products inside of your printer as properly as recognize (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the initial time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and comply with the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu software package, so click (Cancel).
  24. If you want to consider aspect in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to total the set up.

This Printer MG2940 Wireless the Windows setup

Should the wi-fi set up continues to be failing right after following this manual, make absolutely sure you get in touch with us for even extra enable.

Printer MG2940 Wireless Cableless Setup system (For Mac customers only)

Before you start off, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG2940 Wireless
  2. When the following display is displayed, click Open.Printer MG2940 Wireless
  3. When the first display seems, click on (Next).
  4. You could be asked to form in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection system and then click (Next).
  7. Select (Access Point Connection (suggested)) as the wireless LAN connection system then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for virtually any printers now linked. If this can be the quite initial time you may be area up your printer, it’ll not be found. So recall to make absolutely sure that (Environment printer could not be located on the checklist) is picked, then click (Next).
  10. If the following display seems, decide on (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until eventually the orange alarm lamp flashes two instances and release right after the 2nd flash, and then click (Next).
  14. Make absolutely sure that the blue Wi-Fi lamp flashes promptly and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the upcoming message is displayed, click on (Allow).
  17. Once the connection to the entry stage is finished click (Next).
  18. When the following display seems, decide on your area, and then click on (Next).
  19. When the following display seems, decide on your language and click (Next).
  20. When the following display seems, decide on the software package you want to set up, and then click on (Next). If you are not absolutely sure which software package you want to set up at this stage, really don’t be concerned, as you can normally uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to build an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software package will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, decide on the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the quite initial time you are surroundings up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu software package, so click (Cancel).
  32. If you want to consider aspect in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to total the set up.

This Printer MG2940 Wireless the Mac setup

If the wireless setup is nevertheless failing right after following this manual, please contact us for more support.  or get Information from Official Website Canon