PIXMA Printer iP7240 Wireless Connection Setup

Canon PIXMA Printer iP7240 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (at times referred to as routers or hubs) options an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This will allow permitted units this kind of as your Canon PIXMA iP7240 to attach on your network devoid of needing to enter a password, and it will allow a rapidly and simple process of connecting your units.

This process is undoubtedly the easiest usually means of connecting your Printer iP7240 Wireless, so if your entry level has a WPS button, please choose the ‘WPS Connection Method’ tab beneath for directions on connecting building use of this approach. If the router would not help WPS we have offered possibility suggestions to have your Canon PIXMA iP7240 linked so please choose the ‘Standard Connection Method’ tab under.

Printer iP7240 Wireless

Printer iP7240 Wireless WPS Connection Method

Ahead of we start out, some situations should be accomplished to function with the WPS press button approach:

1. The entry challenge has to have an real bodily WPS drive button made available. Remember to examine along with your device’s customer manual for specifics. In situation the WPS drive button is not obtainable, you ought to employ the suggestions to the Regular Connection Method tab.
2. Your network should be applying the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled entry factors to use this protocol.
3. Ensure that the printer is turned on. Press and keep the (Wi-Fi) button about the main with the printer until the orange alarm lamp flashes at the time just after which you can launch it. Guarantee that the Wi-Fi button starts to flash blue just after which head to your entry location and push the (WPS) button within two minutes. For serious elements about pressing the WPS button, keep in mind to examine with the accessibility challenge guide.

The blue Wi-Fi lamp all around the printer will preserve on ?ash though looking for for, or connect in direction of the accessibility location. During the setup, the environmentally pleasant electrical electrical power lamp can even start out to flash. When the printer has produced a romance to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is effectively linked to your wi-fi network, you might print out the neighborhood configurations of one’s printer if you want:

• Be positive that your printer is turned on.
• Load a sheet of A4 or Letter-sized uncomplicated paper.
• Press and hold the Cancel button till the orange alarm lamp flashes fifteen moments and just after that launch it. The network details website will be printed.

When referring on the printout, examine out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the appropriate identify of the wi-fi network.

• This concludes the WPS setup process.
• Please now proceed by putting in the computer software to make the most out of your Canon PIXMA iP7240.
• If you do not have the set up CD that came with your product or service, please download the manuals and software.
• If the wireless setup is even now failing just after following this manual, please contact us for more help.

Printer iP7240 Wireless Standard Connection Method

Remember to use the hyperlinks down under to examine out the proper suggestions for the working process:

Printer iP7240 Wireless Standard Connection Method – For Windows customers only

1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop or computer the moment additional and click on (My Laptop) or (This Computer process), select the CD-ROM and double-click (MSETUP4.EXE). If you do not supply the CD (’s) that came with your merchandise, be positive to acquire the manuals and computer software package deal.
2. When the original display seems, click on (Next).
3. Select (Wireless LAN Connection) as a connection process, then click (Next).
4. Select (Access Point Connection (advised)) as the wireless LAN connection process then click (Next).
5. Ensure that your printer is turned on, make positive the green electrical power lamp is on and then click (Next).
6. The computer software will now briefly search your network for any printers currently linked. If this is the to start with time you are setting up your printer, it will not be identified. So please make certain that (Setting printer could not be found on the listing) is chosen, then click (Next).
7. The Setup Guide Installation will now start out.
8. Click on (Next).
9. Click on (Cableless setup).
10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two occasions and release just after the 2nd flash, then click (Next).
11. Make positive that the blue Wi-Fi lamp flashes rapidly and the green electrical power lamp is lit, then click on (Next).
12. The following message will be displayed
13. Once the connection to the entry level is finished click (Next).
14. When the following display seems, choose your area and click (Next).
15. When the following display seems, choose your language and then click (Next).
16. If the subsequent display seems, select out the system you want to set up, then click on (Following). If you are uncertain which laptop or computer computer software you want to set up at this time, genuinely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
18. When the following display seems, click on (Next).
19. The computer software package deal will now place in. If the following check is exhibited all through the set up, just click on (Redetect) to search for your printer the moment once again. Based on your neighborhood configuration, it might properly get a minute or so for that computer software package deal to detect the printer. This will entail clicking on redetect sometimes.
20. As quickly as the Cableless setup is complete, the following display could be exhibited to indicate the product or service inside your printer as properly as recognize (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
21. If that is the to start with time you are spot up your printer, if the pursuing show is exhibited, click on (Execute) and adhere to the on-display instructions to complete the print head alignment, if not just click on (Next).
22. When the following display is displayed click (Next).
23. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu computer software, so click (Cancel).
24. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
26. Click on (Exit) to finish the set up.

This Printer iP7240 Wireless the Windows setup

Should the wi-fi set up continues to be failing just after following this manual, make positive you phone us for even additional support.

Printer iP7240 Wireless Cableless Setup process (For Mac customers only)

Before you start out, please download the installation software.

1. Once downloaded, go to the spot of the file and double-click it. When the following display is displayed, double-click (Setup).
2. When the following display is displayed, click Open.
3. When the original display seems, click on (Next).
4. You might be asked to style in your password to proceed with the set up. Type in your password and click on (Install Helper).
5. Click (Next).
6. Select (Wireless LAN Connection) as a connection process and then click (Next).
7. Select (Access Point Connection (advised)) as the wireless LAN connection process then click (Next)
8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
9. The system will now briefly lookup your network for practically any printers now linked. If this can be the really to start with time you could be spot up your printer, it’ll not be identified. So keep in mind to make positive that (Environment printer could not be located on the listing) is chosen, then click (Next).
10. If the following display seems, choose (Open).
11. Click on (Next).
12. Click on (Cableless setup).
13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two occasions and release just after the 2nd flash, and then click (Next).
14. Make positive that the blue Wi-Fi lamp flashes rapidly and the green electrical power lamp is lit, and then click on (Next).
15. The following message will be displayed:
16. When the up coming message is displayed, click on (Allow).
17. Once the connection to the entry level is finished click (Next).
18. When the following display seems, choose your area, and then click on (Next).
19. When the following display seems, choose your language and click (Next).
20. When the following display seems, choose the computer software you want to set up, and then click on (Next). If you are not positive which computer software you want to set up at this stage, really do not fear, as you can normally uninstall it at a later on stage if you want.
21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
22. Should the following display seem, if you want to produce an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
23. The computer software will now download and set up.
24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
25. When the following display seems, click (Add Printer).
26. When the following display is displayed, choose the (Canon IJ Network) model of your printer, and click (Add).
27. The following display will briefly be displayed.
28. When the following display seems, click (Next).
29. If this is undoubtedly the really to start with time you are atmosphere up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to carry out the print head alignment, otherwise click on (Upcoming).
30. When the following display seems, click (Next).
31. If you want to register your printer at this stage click (Next), alternatively you can register later on applying the Quick Menu computer software, so click (Cancel).
32. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
33. Should the following display seem, if you want to complete a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
34. Click (Exit) to finish the set up.

This Printer iP7240 Wireless the Mac setup

If the wireless setup is even now failing just after following this manual, please contact us for more help.  or get Information from Official Website Canon