Canon MX924 Wireless Setup – How to set up the wireless connection on your Canon PIXMA MX924 printer and also how to reset the printer to factory settings? Some accessibility factors (occasionally referred to as routers or hubs) function an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup. This lets permitted products this kind of as your Canon MX924 Wireless Setup to connect to your network with out needing to enter a password and it allows a swift and quick process of connecting your products.
This process is by far the best way of connecting your Canon MX924 Wireless Setup, so if your accessibility level has a WPS button, please decide on the ‘WPS Connection Method’ tab under for guidelines on connecting utilizing this process. If your router does not assistance WPS, we have supplied substitute guidelines to get your PIXMA MX924 linked so please decide on the ‘Standard Connection Method’ tab under.
Canon MX924 Wireless Setup WPS Connection Method
Ahead of we start off, some problems ought to be accomplished to get the job done with the WPS press button method:
- The accessibility challenge has to have an real bodily WPS drive button supplied. Remember to examine along with your device’s buyer guidebook for specifics. In situation the WPS drive button is not obtainable, you really should employ the suggestions to the Regular Connection Method tab.
- Your network ought to be utilizing the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled accessibility factors to use this protocol.
- Ensure that the printer is turned on. Press and sustain the (Wi-Fi) button about the primary with the printer until the orange alarm lamp flashes at the time right after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue right after which head to your accessibility area and push the (WPS) button within two minutes. For serious factors about pressing the WPS button, don’t forget to check out with the accessibility challenge guide.
The blue Wi-Fi lamp close to the printer will hold on? Ash when looking for for, or connect in the direction of the accessibility area. During the setup, the environmentally pleasant electrical energy lamp can even start off to flash. When the printer has created a romantic relationship to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.
To verify that the printer is appropriately linked to your wi-fi network, you may possibly print out the neighborhood configurations of one’s printer if you want:
- Be positive that your printer is turned on.
- Load a sheet of A4 or Letter-sized uncomplicated paper.
- Press and hold the Cancel
button until finally the orange alarm lamp flashes fifteen moments and right after that launch it. The network details web site will be printed.
When referring on the printout, check out out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or maybe the title of the wireless network) signifies the appropriate title of the wi-fi network.
- This concludes the WPS setup method.
- Please now proceed by putting in the computer software to make the most out of your Canon PIXMA MX924.
- If you do not have the set up CD that came with your solution, please download the manuals and software.
- If the wireless setup is nonetheless failing right after following this guidebook, please contact us for even further support.
Canon MX924 Wireless Setup Standard Connection Method
Remember to use the hyperlinks down under to check out out the accurate suggestions for the working process:
Get Complete PIXMA Printer MX924 Wireless Connection Setup