Canon Installing Drivers & Software

Posted on

Canon Installing Drivers & Software Wireless Network – How to Installing Your Multifunction to Your Network for the PIXMA MG3220 Windows OS? To implement the equipment by connecting it to the computer system, the program such as the drivers ought to be copied (set up) to the computer’s tricky disk. The installation procedure requires about 20 minutes. (The installation time differs according to the computer setting or maybe the quantity of application program to generally be mounted.)

Network Requirements

my network Network Requirements

Canon Installing Drivers IMPORTANT

  • Log on as the administrator (or a member of the Administrators group).
  • Quit all running applications before installation.
  • Do not switch users during the installation process.
  • Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
  • It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
  • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
    the network. If such a warning message appears, set the security software to always allow access.

Installing the PIXMA MG3220 on Your Wireless Network

  1. If you are installing your printer on your network for the first time, a step-by-step walkthrough of the wireless setup is built into the installation routine of the software that shipped with your PIXMA.
  2. Insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions.
  3. If you don’t have or cannot use the Setup CD-ROM, you can still install the printer using a downloaded file.
  4. Please search by your printer’s name or model in the search field on the right.
  5. Be sure to select Wireless Connection on the Connection Method Selection screen (1-2).

Canon Installing Drivers

Wireless Connection

Canon Installing Drivers network
Continue carefully following the Printer Setup instructions (Steps 2-1 through 2-3) until the Setup Procedure Selection screen (3-1) appears.

On the Setup Procedure Selection screen (3-1) screen, select Wireless Setup Using the USB Cable. This is the recommended setup method. You will need to use the supplied USB cable

Wireless Setup Using the USB Cable

Wireless Setup Using the USB Cable
Continue to follow any on-screen instructions until the Software Installation List appears.

On the Software Installation List select any additional* software to install and click Next.

Canon Installing Drivers MP Drivers is required for installation and cannot be deselected. In addition, we recommend installing My Image Garden and Quick Menu in order to take full advantage of your printer’s features.
If you are using the downloaded ‘Mini

Master setup’ file to install the printer, only the MP Drivers will be installed. Additional software can be downloaded separately. The software can be found in the Software section of Canon Drivers & Software (the same page where you downloaded the Mini Master setup file).

Software Installation List

Software Installation List


The drivers and software will install. Continue to follow the on-screen instructions. Connect the supplied USB cable to the printer and computer when the Connect Cable screen appears

Connect Cable

Connect Cable
The Connect Cable screen closes automatically after the printer is detected

If the Detected Access Points List* appears, select the one you wish to connect to, enter the network key and click connect

*This screen normally appears if you have multiple access points or multiple access points exist in your immediate area.

Detected Access Points List

Detected Access Points List

If the Confirm Connection Access Point* screen appears, verify the information then click Yes

*This screen normally appears when you have only one access point

Confirm Connection Access Point

Confirm Connection Access Point

Disconnect the USB cable when the Disconnect Cable screen appears. Click Next

Disconnect Cable

Canon Installing Drivers

Setup is now complete. Follow any remaining instructions to exit the setup program.

Installing the PIXMA MG3220 on Your Wireless Network

If you can’t find your CD-ROM, you may download the MG3200 series Mini Master Setup, which includes the same step-by-step installation as the CD-ROM, by following the instructions below:

  • Click here to access the MG3220 Canon Drivers & Software page. or Here
  • Select the operating system of your computer in the dropdown lists (see example below).
  • Expand the ‘Drivers’ section, if necessary, by clicking the red triangle.
  • Click on the ‘MG3200 series Mini Master Setup’ entry.
  • After reading the license agreement, click ‘I Agree-Begin Download’ and save the file to your computer.
  • Once the download is complete, double-click the file from its download location to begin the installation.
  • Follow the same instructions as you would if using the Setup CD-ROM.